General Trials Talk

As I get older I think I worry more..I've had a few silly, little get-offs recently. I think kharma may have something in store for me in the near future. I'm not saying that a bar plug on this guy's *R2w Find * throttle could have helped..but...what do you think about the subject..any experiences?

Unless ive completly missed it the coverage of the British Experts has been very thin on the Ground A Dougie Lampkin report and a Third party hosted photo show No Official Results or a Report. After so much pre Event Excitment it almost seems like a Non event ! A shame when so much hard work was put in to get it on

I'm new to bikes and wondered what most people do as a general routine regarding bike cleaning, any tips would be appreciated. I know it sounds like a simple question but you never know, some peoples idea of a good thing could be a bad thing in other peoples eyes.

http://cgi.ebay.co.uk/Trials-bike-Chair-ma...=item3cb0e7c66a Don't know who the builder is but what a star!!!!!!!

Could the Chelsea FC boss be a dark horse on a trials bike? http://news.bbc.co.uk/sport1/hi/football/15135672.stm

Fitted some raptor pegs this evening, on one side the spring sits on top of the hanger, on the other side it sits within. Will this be ok or could it gradually wear the hanger away?

All being well I'm gonna change my bike shortly and just want a quick heads up on what to avoid, currently got a Gasser and like it, mates got a Mont 315 and its nice but a little heavier so I kinda know what they're about (bullet proof?? lol) so any advice on what years or problems the following are prone to? Budgets probably around £1200 ish Beta Rev 3 - stators I know about - any years to sidestep? Sherco - don't know much about but they look nice!! Scorpa - Anything with the Yam engine is good as far as I know Gas Gas, early pro's were problems I think?? I'm a crap rider so the performance side of it doesn't bother me, I'll learn to adapt I'm sure, just don't wa…

I had to replace the water pump seal im my 10' Sherco. (no parts avaiable in Brasil!) I was't able to find this seal here. So, I had to do something to keep ridding.

Just thought I would post some brief, easy to follow advice in view of the number of people who seem to have difficulties with hydraulic brakes or clutches. I would say at least 90% of these problems could be avoided by a few simple steps. 1) Change the fluid (full bleed through) every 6 months or more frequently. Use DOT 4 or HSMO as appropriate. Do not use silicone based fluids. If you see any dirt in reservoir, syringe it out, don't bleed it into other parts of system. 2) When you first get your bike remove the bleed nipples and re fit them using PTFE tape on the threads 3) Check your pads regularly to make sure they move freely and are worn evenly. Any uneven wear…

Does anyone know where I can find 400 x 18 trials tyre weights. The manufactures seem loath to advertise their weights. The ones I am interested in are Michelin X11, Mitas ET01, Dunlop, all tubeless. Thanks.

This could be an anomaly, but I don't think so... Recently, while trying to remove an AJP master cylinder for the first time in several years, the bolts that clamp it to the bars were seized in. This could either be from moisture, or from corrosion caused by the two different metals. Either way, they'll all get anti-seize from now on.

Hi Folks! I just wanted to suggest a bearing company to you all incase you ever (or when) you require some in the future; Chelmer Bearings Ltd - Tel: 01245 281218 Sneeky free adverting I know, but I've never seen a service as impressive as this, I ordered bearings at about 5pm yesterday, and they arrived this morning...exactly what I wanted...no hassle. Such as good service deserves the customers, so I feel that its worth you lot knowing about. Regards, matt

I'm currently messing about packing my bike up with wood, when I work on it.Anyone use the bike stands that you can pick up for about

My back trial tire leaks air What can it be?

Ive just painted my lads 125 pro seat unit and have managed to save the raised 125 sticker that sits in the middle. What i want to know is can anyone recomend a strong glue to restick it with. I was going to use time bond but its not compatible with celulose paint which i belive is in tins of spray paint.

Who does the cheapest price for wheel rim anodising? Candywheels charge

Hi, I have a gg txt pro racing 2013. And i won't more clutch action (faster response) Should i switch from small to large? There's no air in the system and no leaking! Greets Clan

Hi guys, about to do my first trial (wish me luck!) doing an easy clubman level, as I understood that was the entry level for adult. At least at Richmond MC… I’m unsure how much fuel I’ll need to take. Was planning whatever is in my tank + a full gallon can….will that be enough?

Hello, I got this forks for Tiger Cub, Marzocchi 34 mm, guess on Norton sliders. Modified Cub yokes. Lenght from wheel spindle to top of stanction 28.7 "/730 mm. The bike has original frame. I would need help about changing oil, because i feel them too slow. What type, 5w or 10w, and what volume in each fork? My weight is 154 lb (75 kg). Many thanks!!!

I wonder if I could ask some advice. As a late starter (Early 40,s) with a limited budget (