theotherone

Any Kent trials riders out there that can recommend a good, friendly club? I live in Sittingbourne and want to get back riding after a 2 year lay-up. Only problem is, my old riding buddies have hung up their boots so I'm looking for like-minded Kent trials riders to meet up with. Anyone in Sittingbourne or nearby want to meet up at a club trial so I'm not a Billy-no-mates? I used to be an OWLS member, but all the trials were always over in the Tonbridge direction which isn't that local to me. Can anyone out there recommend a more local club that holds club trials on a regular basis? I spoke to the Sittingbourne Trials club some time ago, but I was told they don't hold club trials. Been considering Bexley or 55 Club, but any other suggestions and experiences would be appreciated. Cheers.

Anyone know how to get the forks apart on a mini trial? Need to replace the fork seals. Removed the top fork cap and pulled out the spring. Need to undo the bolt that's located at the bottom of the fork, but how do I stop the internals from spinning? I guess there's a "special tool" for this. Anyone out there got any ideas?

Hi This is a 50cc mini trial auto. The basket having a small amount of play I can understand, but the crankshaft moving side to side is a worry. In my mind the crankshaft should have no side movement, but this moves a lot. Am I right in thinking this way? Should the crankshaft really be able to "float" laterally by 1 to 2mm? Maybe a mini trial owner could check theirs?

Wondered if anyone out there can offer some advice. My sons mini trial (2005 model we believe) has been making a really bad rattle. Started to strip down the engine to check little and big ends. Both have wear, but not enough to generate the sort of volume we are getting. Piston and barrel are ok with snug fitting piston. When I checked the clutch however I was surprised to find that if I pull and push on the main crankshaft I get movement of +/- 1 to 2mm. The nuts are tight on either end. The clutch assembly is tight on the shaft but the clutch basket also can move about. I think this could be where my noise is coming from, but not sure if the movement is normal or not. Can anyone help with advice please? Cheers.

Hi Pete Thanks for the info. I have emailed Gavin and Malcolm with some questions. Just waiting to hear back from them.

Hi Does anyone here know anything about the trials scene in NZ? I may be emigrating due to work to the South Island of NZ in the Dunedin area. Haven't found much via google, so wondered if anyone knows anything about clubs etc. Seems like Christchurch and the North Island have plenty, but way down south the info is limited. Any links and info will be appreciated. Cheers.

Thanks for the tip about the spark plug. I'll check it when I get it.

Hi guys. Picking up an '04 Rev 3 270 at the weekend. Would appreciate any advice you can give me about best fuel mix, oil type and anything else you care to offer up as advice on the Rev 3. Owned GasGas and Sherco before, so not a total novice to trials, but to Beta I am!!!!!! Best places for spares would be great too!!!