lms 6201

hi all ,i have recently bought a 1974 sherpa t ,i have fitted ebc shoes and the result is marginally better than no shoes in it at all , it has nickel drums , would someone know if possibily i have to machine off the chrome and mabey fit a steel liner to get them to work , or any other suggestions ? thanks in advance , steve

hi , have bought for my kids a ty 80 , ( hard to get one in any condition i,ll say!) it has suziki rm 80 forks ( in poor cond) would any one know what the ty fork length from cap to axle center is and the tube diameter , it has i think the rm clamps which are for 27mm tubes , if i can find some early yz 80 forks i would be better off but may have to set up the yz clamps , thanks

www.bjracing.com sell mikuni carb conversion , has adaptors and they jet to suit (so they say anyway)

Me too, O gauge Hornby one ! sorry Andy,bit off topic this but had to ask!! S.M. <{POST_SNAPBACK}> that,s cool , mines a ( as close as i can estimate) 1938 , it has a blue box , the earlier model had a red box , , mine has been re wheeled (as per usual ) due to mazac impurities resulting in breakdown of the alloy , paint has been only touched up ,and is very nice , have just had the field and the armature rewound and a set of new gears cut and fitted up , but this time i have fitted a second reduction gear , (this gear is slightly smaller than the idler gear and is attached to it ,s face , there is just enough clearance to fit it , and gives so much more power with no top speed loss as the motor doesn,t bog down as much , i have a rake of 4 exley coaches it pulls travelling post office , resturant, sleeping , sitting , the whole train is about 6 feet long

Hey matey what you doing with "lizzies" running # for a username S.M. <{POST_SNAPBACK}> well... seeing as i own one and all , but it,s very observant of u to notice

Have just brought home a 1974 alpina 350 (i am fairly sure , as it has a head that looks too small for the barrell) , what niche would this bike have filled ? got it started (BLOODY HELL !! the man said it hadn,t done much work he wasn,t lying , it,s got as much compression as my ty350) but haven,t ridden it yet so am not knowing what gearing is like , would it have been like a long distance trials bike perhaps? and i need one fork slider , one is perfect , one is cactus , thanks steve batkines bundaberg

<{POST_SNAPBACK}> yes they do , not much available in oz and Thanks for the link

thanks , can,t find a reference to dep yet but am still looking

hi thanks for that , i ffound a shop in us with stock us$265 !!

hi does anyone know of anyone making silencers for the 350 , or perhaps knows if the alloy 250 one is a match ? thanks steve batkines lms6201@bigpond.com.au