Jump to content

scruffy

Members
 View Profile  See their activity

  • Posts

    4

  • Joined

  • Last visited

Contact Information
 
   
  1. scruffy

    Tl 250 Handlebar Hight

    scruffy replied to spy's topic in Honda

    Check out Rox Risers, you can roll them forward.
  2. scruffy
    Go to Rox Risers web site, roxspeedfx.com, and look under dualsport risers heading. These will fit trials bikes and they have sizes to fit 7/8" or 1 1/8". RC High Pro Taper bars are 19 mm taller than their trials bars, but they're about 19mm narrower
  3. scruffy
    Check out Rox Risers. These work really well and you can roll them forward or backwards. They come in 1 3/4" and 2". I have a bad back and use the 2" on a Gas Gas and Beta.
  4. rlracer

    Hi Scruffy, you can call me at 918-519-6505 I'm in Oklahoma 2 hours ahead of Cali. Since this is a new top end, leave in the middle for now, you have a spacer on the needle you can play with later. You are going to like the 300, the next move is the factory pipe 15% more power !

  5. scruffy
    My first post and I'm already looking for help. I'm just putting on a 300 kit on a 2008 250 4t rev3 and I'm not sure about how to jet this.I would think it would be jetted leaner, but not sure. Also need to find torque settings for head bolts, etc as I don't have a manual. Thanks I'm at sea level for now.
×
  • Create New...