Jump to content

rileys

Members
 View Profile  See their activity

  • Posts

    30

  • Joined

  • Last visited

 Content Type 

Everything posted by rileys
 
 
  1. rileys

    Low tension

    rileys replied to rileys's topic in Bultaco

    Hi bully. Sorry about the poor picture try this one the wire from the bottom of the coil is fitted to the points. The broken wire is from the top of the coil if that makes sense.
  2. rileys

    Low tension

    rileys posted a topic in Bultaco

    Does anyone know what the Brocken wire is on the low tension for the points in the middle of the photo
  3. rileys

    Crank shaft seals

    rileys replied to rileys's topic in Bultaco

    Thanks guys. It was confusing because there was only one fitted again thank you
  4. rileys

    Crank shaft seals

    rileys posted a topic in Bultaco

    Hi everyone. help please I have a Sherpa 151 model. Is it the 2 seals or 4 seals from inmotion for this model greg
  5. rileys

    Piston rings

    rileys replied to rileys's topic in Bultaco

    Cheers woody
  6. rileys

    Piston rings

    rileys posted a topic in Bultaco

    Model 151 350 piston rings from inmotion does anyone know if they are the Dykes type of ring. No response from inmotion at moment must be really busy greg
  7. rileys

    Piston sleeve

    rileys replied to rileys's topic in Bultaco

    You star. Thank you
  8. rileys

    Piston sleeve

    rileys posted a topic in Bultaco

    Hi all. Piston sleeve. For a model 151 are they still available? Any help much appreciated Greg
  9. rileys
    Thanks guys it’s sounding positive Greg
  10. rileys
    Hi is the motorcycle carrier rack for a Bultaco Sherpa t any good. It would be on back of a new navara any recommendations. Or leave alone ? Greg r
  11. rileys

    TL 250 hose

    rileys replied to rileys's topic in Honda

    Lineaway I have had no luck at all trying find a hose. So as I said make the best of what we have gorilla super glue gel works wonders. And let the search carry on. Good luck with yours Greg
  12. rileys

    TL 250 hose

    rileys replied to rileys's topic in Honda

    Ho dear not looking good. Will have to get the superglue out lol thank you for the reply’s Greg. R
  13. rileys

    TL 250 hose

    rileys posted a topic in Honda

    Hi all just acquired a gorgeous Tl250. And I am looking for a Short hose from the carb to the air box this one has split the last owner tried a quick fix with superglue. not having much luck online finding one Greg R
  14. rileys

    198 A

    rileys replied to rileys's topic in Bultaco

    Thanks for the tips. I will look into that one with the fork seals ?
  15. rileys

    198 A

    rileys replied to rileys's topic in Bultaco

    Thank you all for the advice. will sort it when parts come love the bike tho.
  16. rileys

    198 A

    rileys replied to rileys's topic in Bultaco

    Yes only picked the bike up yesterday and the air box had fuel in it this morning. But I had left the tap open I don’t know if that would cause the problem. Thank you for your reply. yes will do will order a gasket set. just strange why petrol was in the air box. greg
  17. rileys

    198 A

    rileys posted a topic in Bultaco

    Hello. just acquired a nice 198A Just ordering some parts could anyone tell me what fork seals are required. also the mikuni carb is leaking but it is going into the air box taken a pc of the carb seems to be coming from the bottom is it a ball bearing ? I have ordered a new air hose as the one on is split . Any help would be appreciated Greg. R
  18. rileys
    Thanks for the advice guys. Taken all the filler off looks like someone as tried to use solder as there are big blobs all over will have take some time and find the right person to sort it. I have a plastic spare for the time being. My other two bikes have fibreglass tanks they have been sealed but you can not leave petrol in them. The removal of ethanol looks good Do others use this process. thank you
  19. rileys
    Well my 158. That I have owned for about 5 years and done nothing to it. Always been too busy. Proper chuffed kicks up on the 1st kick every time BUT now I have a petrol leek it’s an alloy tank but never looked very good on one side so off it came and stripped it. Wow what a mess someone has done just wondered can it be salvaged ? Nice to know what you guys think would really like to save it. Here’s a picture
  20. rileys
    Thank you I have reset as woody said. Fired up and running a bit revy and a bit smokey. A bit more tweaking should get there. thanks sherpa325
  21. rileys
    Thank you woody. I will reset it. I have 3 bikes to sort out. Somehow ?
  22. rileys
    Whoops yes the back plate was in correct place I had the flywheel set on the key and no start and back fire so was checking other posts that said key not needed. So took it out and altered the stata. And fired up. Did I just get lucky and should I put the key back in and try again woody ? l know I’m a bit green but love spending time with the bike and learning from you guys
  23. rileys
    Yes thanks for the reply’s. great bit of kit from in motion. Should be plug in and start. Went in garage for a few hours today. The woodruff key is not needed Carl. and as Johnjsy said if the timing is right it will fire. So I had to alter it just a little bit and it started up happy days. Again thanks for the reply’s picture of my 158
  24. rileys
    Just fitted a in motion electronic ignition with lights. Got spark fuel but will not start do I need a condenser with this ignition ?
  25. rileys
    Thank you. For the reply much appreciated put the new in motion electronic ignition in this morning got spark and fuel but no start. ? just thinking I don’t need A condenser with the new set Do I will try again tomorrow. Got to ride my bike this summer
 
×
  • Create New...