[Dt250 piston rings]

I installed new rings last night, with expansion ring under lower ring. Give her a run tonight ??

[Dt250 piston rings]

Cheers for that! ??

[Dt250 piston rings]

There correct rings for dt 250 , not seen one like that before 

[Dt250 piston rings]

Spoiler

 

Spoiler

 

 

[Dt250 piston rings]

I've got a dt250 piston for my ty! New rings arrived, in box with rings is a thin 50pence shaped ring! Can anyone tell me where it goes?

[Dt piston]

It was off a 78 ty250 , he said it ran ok but I won't know till I try it. 

[Dt piston]

I got a spare barrel with a dt piston off flee bay for spares, I'm running a wossner at mo, but it's started with piston slap. So I was gonna try spare barrel & piston. 

[Dt piston]

Hi 

can anyone tell me if a dt250 piston will work ok in my ty250 twinshock?

[Ty250 twinshock]

Cheers for that! I'll give it a go ??

[Ty250 twinshock]

I was told larger gap required with electronic ignition, I'll try it with standard gap

 

[Ty250 twinshock]

Can anyone tell me correct plug gap for ty 250 twinshock with electronic ignition?

[Ty 250 forks]

Do they make them for ty twinshock? I can only find mono on there web site 

[Ty 250 forks]

I'm going to order dampers & springs, need to get forks re chromed first 

[Ty 250 forks]

Cheers ??

[Ty 250 forks]

Thanks for advice ??

[Ty 250 forks]

Sounds like a lot of work! 

will I need the magical damper rods & springs to get my original forks working better ?

[Ty 250 forks]

Re chrome sounds like the way to go ??

Cheers

[Ty 250 forks]

Thanks for advice ??

[Ty 250 forks]

Yes! Good point, they say the magical internals work ok 

[Ty 250 forks]

I didn't know whether to go down route of fitting mono forks or similar 

[Ty 250 forks]

Replacing them, there pitted & leaking! 

[Ty 250 forks]

Hi! I'm thinking of upgrading my ty250 twinshock forks, could do with some advice on what forks work well ?

 

[Bogging down]

It had rebore & wossner piston 6months ago! & electronic ignition 2 week ago! Just spoke to John at ty trials! He said it could be pulling air in when engine gets hotter than normal 

[Bogging down]

I'm going to try it later after work! I'll double check filters just in case

[Bogging down]

Fuel tap is new & it has an inline filter! I pull tube off carb to make sure it ran through. The only thing I've done is put a new air filter on & oiled it. Could it be engine temp as I've not had it running for this length of time stood still.