70sRider

Hi I am looking for help/information about my 1980 Fantic 200 rear kick please. I am in the process of sorting out my Fantic 200 and the distance between the shock mounting points is 203mm from inside frame mounting point to inside mounting point at the top on the frame and 220mm for the same points on the swinging arm this does'nt seem right to me and nothing seems to be bent, even with the wheel in and done up the bottom distance is still 215mm so the rear shocks are not parallel. I wonder if someone has replaced the swinging arm with one from a different Fantic. Any views or help would be appreciated. Thank you.

Hi I am looking for advice regarding the amount of free side play at the side of the big end between the big end and the Crank flywheel. I have just pressed in a new crank pin and the width across the flywheel is the same as the width before I rebuilt it, at the moment the side play on the big end is 0.3mm(0.012in). I would be grateful if anyone could let me know if this is ok or if they have a workshop manual what the min/max tolerances are. Many Thanks.