Flooky

Thanks

Hi can anyone confirm how the air filter clip realeases please. Thanks

Yep, still not leaking

thanks all, I will give it a go with jb weld plastic bond. and let you know how it goes

Thanks all

great idea, I think I have got some but maybe not 3m. cheers good call

cheers, I will. did you unscrew the fitting and jb weld the threads or just smear it around the rim with it screwed in ?

cheers, what JB weld did you use ? standard or plastic bond, I have got standard but ordered jb weld plastic bond thinking it would be better.

plastic tank so not really an option, but thanks

Hi, my sons txt racings fuel tank is leaking from the spigot that the the fuel tap pushes into. I thought it was the tap but its the spout/spigot that the tap pushes into. On further inspection it is threaded into the tank with a bonding agent at the factory, the part is not available a on its own it comes as part of a new tank. I was wondering if anybody else has had this happen and what you used to seal it ? I have ordered some JB weld plastic bond which is apparently fuel resistant, but any other ideas would be very welcome. cheers.

My son and I get out most weekends, Horsham, RRND, Bognor and Worthing clubs. We live in East Preston. Doing the Worthing trial tomorrow, might see you there. Brian.

Yeah its a Kehin, no I will just clean it up and see what jetting is in it. cheers

Yeah , we were rushing a bit , I will look into carb/jets etc. Having just got the bike we wanted to see how it went etc. We bought it from a friend so I will ask if he had any issues. cheers all.

I know, I thought that, but it was as clear cut as slow throttle...bog...quick no bog. I gonna swop back to see...the bikes haunted !!

Hi, my son just bought the above bike, we went to practice today and it was fine , when he went to get over something bigger it bogged, badly..I had a go and when I wound the throttle wide it bogged like the brakes were on. We went back to the van for a head scratch and fitted the quick action from my sherco ( white tube, one that came off was black ). fixed !!! now I am glad it is but I cant for the life of me see why. We tried everything to make it bog again and it wouldn't.. any ideas ? cheers

Thanks fellas, Brian

Hi all, anybody got any advice on a Gas Gas 2018 250, good or bad..? my son is interested in one but at a trial today we heard they were trouble ! cheers in advance

I had this, took ages and loads of kicks to start , then it would run fine all day, turned out to be in line fuel filter. I think once it had a flow it was fine but wouldn't pull fuel through. It looked clean but I cut it open to see after fitting a new one and it was partially blocked. 2014 sherco 250 st

Yeah I did, I lowered the fork so it was held by the lower clamp in the middle of the slider. I think finger tight from now on is ok. cheers people. flooky

Yeah it is. he he.

Yeah, makes sense, I will tidy it up with a file and hand tight it. cheers

Hi, I have managed to round off the small square top on the compression side of my sons evo (2011 250). its all back together but I don't hold out much hope for next time, without wrecking it completely. Any ideas, machine it smaller ? buy a new top? any body else had this trouble ? to be fair it was a bit wrecked when we bought the bike . I am not a complete animal !

New to the forum, been looking for ages but just got round to joining. I have a Sherco and my son rides a Beta. thanks for having us. Flooky