stogga

Hi all. Would anyone have any advice (vids or pics) or could point me a in the direction of any info on the stripdown and rebuild of the 70cc engine from the 2003 txt 70 rookie. Tia Neil

Hi all is spares still available for the 250 easy . I have read the engine is rotax .

Thanks how much to post to uk regards Neil

Hi all does anyone know where I could get some swing are pin rubber bungs from ?

Thanks for your message I'll try that

Hi It seems after some research that the older txt radiators had the thermostats inline and not in the radiator itself. Does anyone know if these older rads are available or could the port be blocked out and the new type used. Regards Neil

Hi all. My son has damaged his radiator today and after looking at replacements on web they all seem to have an additional port on the top of them . . Can anyone shed any info on what this port is for as the 70 cc rookie does not seem to have it

dellorto phbg 21 ds gas gas 70 2003 Carburettor adjustment. Hi all I am trying to adjust the tickover on this carb/ bike . There are two adjustment screws on the side Idle mixture and slide stop screw . I have taken this carb apart and blew out and cleaned all visible jets and galleries. Now back on bike and starts and runs ok but the tickover screw doesn't seem to be able to screw in any more to raise the speed of engine. I have bought a new slider and this does not make any difference. Can anyone think of any other things I may be missing . Regards Neil

What's a good replacement caliper if I can't get the hebo ones . If I changed them would I need to change master cylinders too?

Thanks all for you replies

Hi can anyone tell me where I can get a rebuild kit for the hebo front caliper from a 2003 txt 70. Also the dellorto carb spares as I think I need a slider that the needle fits into as the tickover screw seems to have worn away the bit of the slider it actually touches. Kind regards Neil

Thanks for the info I'll have a look there Regards Neil

Hi the engine on ours sounds good . No grumbling. Maybe the main bearings are a bit tired. I could try and record it but not sure if it would help

Hi does anyone know where to get the progressive springs from. Also people's best upgrades for the 175 that they have done and it's worked well Any info greatly appreciated Neil

Hi all where is the best place to get engine and gearbox spares for the 305 please

That's great thankyou . I'll get it off. Clean and re set it . Thanks again Neil

Hi all . Would anybody know the settings for a 2003 70 cc rookie carburettor. I cannot find much info on them Regards Neil

Hi all could anyone tell me the best 2 stroke oil and mix ratio for the 70 rookie . New to us bike and not sure of mixture. Regards Neil

Hi all . I have recently acquired a 2003 70 cc rookie and wondered if the frame is the same as the bigger cc bikes of the same year. As I need a rear linkage bearing kit Regards Neil

Hi there I have a problem with my kick start it works fine as in starting the bike but it doesnt return to the top . I have taken the side case off and the clutch also the kickstart gear . The shaft has a half moon shape around it which a key fits in and travels around the same as the kickstart . It feels like there is a spring in there but it doesnt rest at the top could you help this yam is a drum brake white frame model cheers .