[Txt dellorto phbg 21]

Hi does anyone know of the correct jets and slide pin for the txt 70 cc 

 

Regards Neil 

[TXT 70cc]

Hi all.

 

Would anyone have any advice (vids or pics) or could point me a in the direction of any info on the stripdown and rebuild of the 70cc engine from the 2003 txt 70 rookie.

 

Tia Neil

[Easy]

Hi all is spares still available for the 250 easy . I have read the engine is rotax .

 

 

 

[2003txt]

Thanks how much to post to uk regards Neil

 

[2003txt]

Hi all does anyone know where I could get some swing are pin rubber bungs from ?

[gas gas 70 2003 radiator]

Thanks for your message I'll try that 

[gas gas 70 2003 radiator]

Hi 

 

It seems after some research that the older txt radiators had the thermostats inline and not in the radiator itself.

 

Does anyone know if these older rads are available or could the port be blocked out and the new type used.

 

Regards Neil

[gas gas 70 2003 radiator]

Hi all.

 

My son has damaged his radiator today and after looking at replacements on web they all seem to have an additional port on the top of them . . Can anyone shed any info on what this port is for as the 70 cc rookie does not seem to have it

[gas gas 70 2003 carb]

dellorto phbg 21 ds  gas gas 70  2003

 

Carburettor adjustment.

 

Hi all I am trying to adjust the tickover on this carb/ bike . There are two adjustment screws on the side 

 

Idle mixture and slide stop screw . I have taken this carb apart and blew out and cleaned all visible jets and galleries. Now back on bike and starts and runs ok but the tickover screw doesn't seem to be able to screw in any more to raise the speed of engine. I have bought a new slider and this does not make any difference. Can anyone think of any other things I may be missing .

 

Regards Neil

[2003 txt hebo caliper]

What's a good replacement caliper if I can't get the hebo ones . If I changed them would I need to change master cylinders too?

[2003 txt hebo caliper]

Thanks all for you replies

[2003 txt hebo caliper]

Hi can anyone tell me where I can get a rebuild kit for the hebo front caliper from a 2003 txt 70.

 

Also the dellorto carb spares as I think I need a slider that the needle fits into as the tickover screw seems to have worn away the bit of the slider it actually touches.

 

Kind regards Neil

[Ty175 forks]

Thanks for the info I'll have a look there 

 

Regards Neil

[Gas gas 70]

Hi the engine on ours sounds good . No grumbling. Maybe the main bearings are a bit tired. I could try and record it but not sure if it would help

 

[Ty175 forks]

Hi does anyone know where to get the progressive springs from. 

Also people's best upgrades for the 175 that they have done and it's worked well 

Any info greatly appreciated

 

Neil

[Fantic 305]

Hi all where is the best place to get engine and gearbox spares for the 305 please

[Gas gas 70]

That's great thankyou .

 

I'll get it off. Clean and re set it .

 

Thanks again

Neil

 

 

[Gas gas 70]

Hi all . Would anybody know the settings for a 2003 70 cc rookie carburettor.  I cannot find much info on them

Regards

Neil

[2003 70 rookie]

Hi all could anyone tell me the best 2 stroke oil and mix ratio for the 70 rookie .

New to us bike and not sure of mixture.

Regards Neil

[Txt rookie]

Hi all . 

I have recently acquired a 2003 70 cc rookie and wondered if the frame is the same as the bigger cc bikes of the same year. As I need a rear linkage bearing kit

 

Regards Neil

 

[Ty 250 Kick Start]

Hi there I have a problem with my kick start it works fine as in starting the bike but it doesnt return to the top . I have taken the side case off and the clutch also the kickstart gear . The shaft has a half moon shape around it which a key fits in and travels around the same as the kickstart . It feels like there is a spring in there but it doesnt rest at the top could you help this yam is a drum brake white frame model cheers .