Try a clear vent line. Believe it or not, my 2016 Evo gas cap vent was actually auto siphoning. It had a clear vent line and you could see alternating bubbles and gas coming up even when stopped after running. I was pointed to a posting that I can no longer find describing the issue. I disassembled, cleaned, reassembled and the issue was gone. I had to be quite brutal to pry the cap apart and thought it was going to break it but did not. IIRC there were 2 springs and 2 valves in the cap. It was clean inside with nothing obviously wrong. I'm guessing that some of the little parts got out of position created the situation. There was a recommendation for a CSP cap but at the time they only fit 2018 and later.
Ok didn’t know you could pull it apart. Or that it did anything. Maybe I’ll try that with mine I’m guessing something has gone wrong if it’s got moving pieces in it
My vent hose from my tank seems to leak really often. Doing any riding it’s been pouring over my bike. I’ve tried routing it different ways to stop it with no luck. Is something broken?
I had this issue on my 14 beta evo 300. Re bled. No fix. New pads and cleaned the rotor. Little better but still not great. Went to a galfer rotor and bought the jitsie race pads. Wayyyy better now. I’m guessing the pad compound was the biggest difference but would try that
I’d say go 300 if it feels fine. Had lots of people say not to get a 300 enduro back when I was looking at 250 vs 300. Glad I got the 300. I got a 300 beta recently and the power doesn’t seem uncontrollable at all
Having an issue with my 14 evo. Seems to run good if i rev it up a bunch and clean it out. But I’ll idle around and run it in the low rpm’s and it just runs extremely blubbery up top. Like when the bikes just been started and try to give it a bunch of throttle.
I’ve gone one down on the main. I’m in the top clip. Air screw is out. Cleaned the air filter 2x I’ve sort of tried running it with the air filter out but I’ll have to test it better than just my parkade. Any other reason I could be having this issue or is this just normal?
2014 beta evo tank vent leaking
in Beta
Posted
Ok didn’t know you could pull it apart. Or that it did anything. Maybe I’ll try that with mine I’m guessing something has gone wrong if it’s got moving pieces in it