leroy

so any of you have any idea where i myt find out which float goeas at which side? cheers liam

well i had them done a a shop so its there problem not minebut just couldnt understand why they wer leaking thats all

ok cheers but do you have any idea where i might be able to find out wich float goes at wich side

was out on my bike over the weekend up charlton and war riding down near the via-duct, i was crossing the river when suddenly the front wheels slipped and the bike went under. i got the bike ticking over but as soon as u reved it a little it wud just stall eventually i got the revs up a lil and got it up in the carpark. i then finally got the bike reving as normal. i got the bike home and cleaned the carb out and flushed the tank out and i put the carb back together and now when i start the bike and leave it ticking over petrol starts pourin out off the over flow, now my bike (montesa cota 311) has 2 float and 1 is is 1/4 and the other is 5/8 and ive tried them both ways and it still put petrol out of the overflow and the floats slide up and down ok and the carb is clean any ideas plzz liam

ok cheers

thanks ive had the fork done now and was out on it over the weekend and just looked yesterday (thur 15th feb) and noticed they are leaking u have any idea wot could be wrong. cheers

ok cheers for that

well i dont know much about clutches but on my montesa cota 311, when i start the bike up and put it straight into gear (using the clutch obv) the bike jumps forward a little but then as soon as the gearbox is wormed up the clutch works fine.

ok thanks do you have any idea on how to fit them regards liam

good spots to get them from any body know any thanks

anybody have any idea of a cheap price for the seals