afroash20

Hello, Can anyone tell me which footrests are best for a tlr 200 without having to do any welding. Thanks in advance

Hi, Saw a dt175 in trials trim the other week at a trial just wondering if anyone on here has converted one to trials speck and what its like? Is it just the same the ty175? Cheers

Hi there, Anyone done a disk conversion on a ty175? can you use the brake system of a late ty250 monoshock? Thanks

Hi thanks for your reply, Did you buy a brand new dt175 carb? did you have to change anything to the inlet hose (carb-Head) or does it fit straight on? thanks again

Hi there, Has anyone put a dt175 Carburetor on a ty175 what are the improvements? Cheers Ash

hi there, Does anyone know of the paint code for the frame of a ty175 ?getting it shotblasted and powdercoated soon. many thanks Ash

thanks for the reply. Wheres your second tube go at the back? is that open to atmosphere? Did you have to change your reeds? if i wanted to buy one where do i go and how much roughly would i pay thanks again

Someone told me you could get a boost bottle for a yam 175 that goes between the carb and reed valve which gives it some more oomph is this true? and if so where can i get one from and are they any good and how hard are they to fit? cheers

hi there, Perhaps try a new condensor

Hi there, My tl is a 122cc but has been bored out to 61mm i now need a new piston and rings as it smokes quite a bit this seems to be an odd size does anyone know where I can get these items or at least a set of rings? Thanks Ash

Hi there Does anyone know where I can buy a drive chain tensioner from for my Honda Tl125 ? Thanks Ash

Hi There, Has anyone got a Honda TLR 200 for sale? Thanks Ash

Hi there, thanks for the info, where would you suggest to get some Piston and rings apart from sammy miller is 61 a standard 150cc bore ? Cheers Ash

Does Anyone know of the standard bore size of the 122cc TL My cylinder bore has been increased to 61 mm id like to replace the rings but dont know what oversize to ask for Cheers Ash

Yep it's the one piece head im in high wycombe bucks uk

Hi there, Ive got the usual problem with camshaft bearing surfaces worn out with excessive movement Ive been told there are places that will machine the head to fit new bushes or bearings. Anybody know of any places? Or has anyone got a cylinder head mines the 122cc Many Thanks Ash

Could it be the primary coil? Is the primary coil in the flywheel? if so we have renewed it. Many thanks

t Ive bought this Honda Tl 125 k2 1974 in bits, the engines all assembled I can only run the bike with a 6v battery connected to the positive side of the ht coil , when i try and connect the wire from the generator into the circuit there is no ht spark, with the engine running from a 6v supply battery i measure the output voltage from the generator which I believe should be ac it only reads 2 volts, as i thought there was a fault with the coil windings I bought a new set , when i came to refit the new ones i still only get 2 volts reading. Any suggestions? Cheers Ash