cobbrev3

I know Sammy Millers had a batch last week because i got one but I believe they were pre ordered. Might be worth a call though...

As stated previously, the carb will need the 'mod'. As for the brake, the master cylinders from experience need rebuilding along with the caliper when they get old make sure you use proper brake rubber grease on the seals. The fan might not cut in when its cold, I had a fan go wrong once on one of my beta's but I did also have a couple of thermostats fail both items are easy to test.

Hi guys, I have been contemplating putting a ty mono engine into a twinshock frame. I know this has been done before, but wondered what was involved and any potential pit falls before i bite the bullet and have a go. I'm sure you helpful lot will be of assistance..

Put the bike in top gear, without the engine running and rock it backwards and forwards with the clutch pulled in. This should free off the plates. If not try riding it with the clutch pulled in, it should free off fairly easily.