as it say does anyone know what the bike is like without the flywheel weight on? i havent got one yet but i am hoping to get an 09 shortly and wundered if taking the flywheel weight off made any difference??good or bad?? recomend doing it or not??
You didn't damage that tube by any chance did you?
first of all thanks for the advice.
no i was very carefull with that tube as it was a bugger to get on and like yourself i dont like the angle of it....poor design i think??
also dan no al of them hav got 250s and its not just a bit quicker its alot quicker...i wounderd if it had owt to do with maybe jets or needle height??i dont know much about working on motorbike i work on push bikes so forgive me if i seem a bit dumb to things.
also yes i take the jets out that i can and blow air through them with a compressor, i see where max is comming from but why would lampkins(british importer) issues a set of float changing instructions??
to me this is the only thing that is wrong with the betas everything else is spot on...why they cant sort this problem out at the factory i dont know!!i think that it must have lost them alot of sales in the UK i dont know about across the pond but people here just dont want the hassle...they just want to be able to clean it take the air filter out and clean it then put it back n thats it done.
hi guys i dont know if anyone can help me with a couple of questions or not...
firstly i have one of the first batches of 08 250's, alot of the other guys around my end who got there bikes a couple of months after myn, there bikes rev up alot quicker than mine, could there be a reason for this or is it just a case of its my bike and i have to live with it that way??
secondly my carb is still peeing out fuel, i have adjusted the carb must be four or five times now (by that i mean the float) and its ok for a week or two but then it goes back to normal....again the guys around my end whoo have had there bikes a couple of months after me, there bikes havent seemed to leak??
do you think that both of these arer because it is one of the first batches or some other reason??is it could be another reason, could someone maybe shead some light on what
if you are wanting a bike that will perform as well i would have to say Sherco 07...although some of the frames crack rathmels do replace them. as for everything else there is no problems i do also believe that they are the all round best engine power wise for a 125...the gasgas seem only to be good on high revs the scorpa seems to be choked up all the time and the betas seem to soft...i would def say sherco though!
Sherco 2010 World First Pic
in Sherco
Posted
that hottie is Katy Bullock
lol
the girl from xfactor who sang in the one peice suit in the televised auditions
Lee Sampsons Girlfriend
Cheers
Jono