biff_rogers Posted March 25, 2007 Report Share Posted March 25, 2007 (edited) Okay...it's been a few days since I took apart the front end to repack wheel bearings and now I'm clueless as to which wheel spacer goes where? The parts diagram doesn't really specify which side is which. I need to know which side does the longer spacer go on? The rotor/disc side? Yeah...I'll pay attention next time! haha Edited March 25, 2007 by biff_rogers Quote Link to comment Share on other sites More sharing options...
copemech Posted March 26, 2007 Report Share Posted March 26, 2007 The way it FITS! The caliper has to align with the disc, so go figure! Clue " L=L", from the front! Quote Link to comment Share on other sites More sharing options...
tilertrialler Posted March 28, 2007 Report Share Posted March 28, 2007 did you measure the spacers I have 2 spacers the same size and it was fitted one spacer and a steel washer on the non disc side. thats from new, wondering weather to take washer out, obiviosly there for a reason. will get new spacer made first , good old beta Quote Link to comment Share on other sites More sharing options...
barrybaines Posted March 28, 2007 Report Share Posted March 28, 2007 did you measure the spacers I have 2 spacers the same size and it was fitted one spacer and a steel washer on the non disc side. thats from new, wondering weather to take washer out, obiviosly there for a reason. will get new spacer made first , good old beta I'm a little confused? is the washer offending you? Quote Link to comment Share on other sites More sharing options...
mad4it Posted March 29, 2007 Report Share Posted March 29, 2007 The spacers on the front wheel are the same size and the washer goes on the right hand side,this is fitted when the speedo drive has been removed! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.