1961peter Posted June 4, 2007 Report Share Posted June 4, 2007 Hello all, I have a 1983 Honda TL125D This uses a 22 mm Keihin carburettor which has two codes stamped on it. These are PC04J and VB. Can anyone tell me the correct float height? It is 19 mm now, and the bike runs a little rich. Increasing the height to 20 mm will bring the float level. I will try this but does anyone know the height set by the factory? Thanks, Peter. Quote Link to comment Share on other sites More sharing options...
brian r Posted June 4, 2007 Report Share Posted June 4, 2007 Hi Peter, Your float level isn't going to make the bike run a little rich. It only turns on or off the the needle to keep the bowl full without having it too full. What is the bike doing now? Fouling plugs? Quote Link to comment Share on other sites More sharing options...
tlrs Posted June 4, 2007 Report Share Posted June 4, 2007 pc04j is the right carb manual > float level = 20mm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.