Jump to content

Sherco 290 Cooling Fan Probs?


sherco290murph
 Share

Recommended Posts

hi guys

need a little help reference my cooloing fan on my sherco 290. im not too sure ifs working as ive only had the bike a couple of weeks. what sort of temperature is needed before the fan kicks in. ive been out on it this morning for about to hours and it still didnt kick in. is there a way of checking the fan is working without having to run the bike. any advice is very greatly appreciated

thanks very much

Link to comment
Share on other sites

 

 

first check the coolant level, the thermo switch for the fan will not work without coolant in the ststem.

The fan normally cycles after about 5 min. running from cold (around 180f water temp i think) . If it does not come on,

disconnect thermo switch and connect wires together, start the motor and the fan should run. This is only a temp fix!

If it still does not run, you have problems! :wub:

Link to comment
Share on other sites

 
 
 

Or stick a 12 v battery charger direct to the fan. That way you'll bypass everything and know if it's just the fan motor that's had it. No panic if it is. Sherco ones tend to be quite expensive so I stuck a gas gas one on mine for half the price. Just had to extend the wires slightly. Good luck

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...