Just taken the front wheel out of my 1999 315R. There is a collared spacer on the disc side of the axle, but nothing on the other side. Just wondered as the axle does not sit flush with the forks on the right side. It is actually about 1/4inch in on the bottom fork clamp.

Thanks

Tommy

tommy have look at this link it will help

http://www.apexmotosports.com/montesa%20parts%20book/f-7.htm

Edited December 16, 200817 yr by milfy

My 02 has a spacer on both sides. The non disc side is just a sleeve no collar.

If no speedo drive should have a after market spacer on non disc side. If speedo then no spacer.