rustybay Posted March 11, 2010 Report Share Posted March 11, 2010 Hi there Need help on wiring up a kill switch on a 1995 jt 350,got a bike with no kill switch,have now got switch but where do i connect it? if you can help in anyway, regards wayne Quote Link to comment Share on other sites More sharing options...
jse Posted March 11, 2010 Report Share Posted March 11, 2010 Hi thereNeed help on wiring up a kill switch on a 1995 jt 350,got a bike with no kill switch,have now got switch but where do i connect it? if you can help in anyway, regards wayne Hello again, Wayne. I just saw this post after I sent you a link to the Ducati wiring diagram on your e-mail account and some info as to what type of switch to use and where to mount it. Cheers. Jon Oh, for others: the 94-96 Ducati wiring diagram at http://www.trialspartsusa.com/tech.html , a Yamaha YZ250 two-wire switch, one wire to the black wire on the CDI and other wire grounded to the CDI mount on the frame and mount the switch in the center of the bars so it's protected and easy to get to if the left side of the bar is buried in water, brush, rocks or mud. That position also makes it a little easier to reach the muffler end to shut down the engine if it goes WFO. Quote Link to comment Share on other sites More sharing options...
des Posted March 12, 2010 Report Share Posted March 12, 2010 Find the low tension wire on the coil and link into that the other wire needs to be earthed easy as that. Quote Link to comment Share on other sites More sharing options...
rustybay Posted March 12, 2010 Author Report Share Posted March 12, 2010 Thanks jon, your a star. 2 posts and 2 great replys been on site,printed off diagram got in touch with gasgas uk asked for parts list, they have posted me one at a cost of over Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.