Gasgas

[slack]

Hi to everyone, I have an 05 Raga 300 which i've owned for a couple of months now.Does any body know the mixture settings as mine is set at 1 turn out with a nice colour to the plug,but it seems to pink alot when you crack the throttle open.I have not checked the needle height yet or the size of the jets i was just wondering what the settings were so i had a clue where to start from.

[shercoman2k8]

Are you using super unleaded - quite often the mixture can be perfect, but due to standard fuel, pre-ignition often occurs.

[jse]

Hi to everyone, I have an 05 Raga 300 which i've owned for a couple of months now.Does any body know the mixture settings as mine is set at 1 turn out with a nice colour to the plug,but it seems to pink alot when you crack the throttle open.I have not checked the needle height yet or the size of the jets i was just wondering what the settings were so i had a clue where to start from.

Standard settings for the 05' Raga (sea level) are:

MAIN: 122

PILOT: 45 (48 OK)

NEEDLE: JJH (CENTER OF FIVE POSITIONS)

SLIDE: 3.5

AIRSCREW: 2.5 TURNS OUT

FLOAT HEIGHT: ARMS IN LEVEL PLANE WITH FLOAT BOWL BASE (PARALLEL)

Other riders have found a slight change to these settings help fine-tune the bike to their

riding area and skill level so you could do a TC search and get some additional data there.

Usually pinking on initial throttle opening can be cured with raising the needle and/or a slightly

richer pilot, then setting the air screw to get the best response when the throttle is quickly opened

from idle (there is no universal, "perfect" air/fuel screw setting and each engine is a little different).

Jon