buzz9 Posted February 22, 2011 Report Share Posted February 22, 2011 help! Iam fitting a bantam cub rear hub to my c15. .. how ever the rear bantam sprocket is a narrower gauge from the c15 chain , i beleive the chain size is a 428 for the c15 . i need to have a sprocket made which fits the bantam hub and is compatible in size to the drive sprocket and chain on the c15 does any one know where i can get a rear sprocket made ? Quote Link to comment Share on other sites More sharing options...
b40rt Posted February 22, 2011 Report Share Posted February 22, 2011 have a look here http://www.trialsbits.co.uk/index.php?cPath=78_107_228&sort=2a&page=2 Quote Link to comment Share on other sites More sharing options...
buzz9 Posted February 22, 2011 Author Report Share Posted February 22, 2011 Thankyou , good information i would prefer a steel sprocket , how ever if i cannot source one , its a good back up plan . Quote Link to comment Share on other sites More sharing options...
old trials fanatic Posted February 22, 2011 Report Share Posted February 22, 2011 Bantam and Cub sprockets are interchangeable. Give Talon a ring if you're stuck. Why would you want steel specifically ? Alloy does the job perfectly and is lighter. Quote Link to comment Share on other sites More sharing options...
totalshell Posted February 23, 2011 Report Share Posted February 23, 2011 a steel sproket would be very heavy, for a bespoke sproket http://www.sprocketsunlimited.com/ Quote Link to comment Share on other sites More sharing options...
gazer Posted February 23, 2011 Report Share Posted February 23, 2011 talon made me up a new rear sprocket and soldered it back on the old hub for my old 500t norton, sent them the old hub they machined off the old sprocket put on the new one, Quote Link to comment Share on other sites More sharing options...
buzz9 Posted February 23, 2011 Author Report Share Posted February 23, 2011 HI was the made up special from talon expensive ? Quote Link to comment Share on other sites More sharing options...
gazer Posted February 25, 2011 Report Share Posted February 25, 2011 cost about 90 pounds, for the hole job, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.