footpegleg Posted May 28, 2013 Report Share Posted May 28, 2013 Ok back again for some more help Because i am over 6ft, found that while riding most of my weight was goin forward onto the front forks, so after speaking to few friends they said "why no try some risers" So got some apico fatbar risers to suit make and model However, after removing old ones, went to fit new ones with 25mm lift adaptors and the bolts dont quite line up proper with the existing holes, just slightly of, Nothing wrong with the riser kit all fits together nicely but soon as i fit the handlebars to them they seem to go little bit squinty?? Hmmmm I have managed to get them in but on closer inspection one side is about 2mm off Has anybody else seen this problem b4 and is there any way to rectify it?? Sherco 2008 250 model Cheers guys footpegleg gm Quote Link to comment Share on other sites More sharing options...
osiris Posted May 28, 2013 Report Share Posted May 28, 2013 Ask to Splatshop. There you can order lift. Thats rather cheap. I bought the same. I am 188 cm Quote Link to comment Share on other sites More sharing options...
copemech Posted May 29, 2013 Report Share Posted May 29, 2013 Yes, seems some fatbar risers/clamps are 2-3mm off the Sherco pattern. Quote Link to comment Share on other sites More sharing options...
osiris Posted May 29, 2013 Report Share Posted May 29, 2013 http://www.splatshop.co.uk/handlebar-riser-plates.html Quote Link to comment Share on other sites More sharing options...
footpegleg Posted May 29, 2013 Author Report Share Posted May 29, 2013 Hey thanks for that guys that seems to make better sence, should have looked here first, have had some stuff from them before Bummer they are all out of stock will have to keep checking back Quote Link to comment Share on other sites More sharing options...
copemech Posted May 30, 2013 Report Share Posted May 30, 2013 See if you may source some bolts in the meantime, cause you will need them. Splat Chris may have, may not? Quote Link to comment Share on other sites More sharing options...
footpegleg Posted May 31, 2013 Author Report Share Posted May 31, 2013 OK scrap the risers got new bars the bigger ones much better improved wheelie time too wohoo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.