marky boy Posted January 7, 2004 Report Share Posted January 7, 2004 A friend of mine is looking for some tapered bars for his 04 Rev3 . He wants ones just like on the Scorpa . Any ideas on.... who sells them , cost and if they will fit?? Cheers Quote Link to comment Share on other sites More sharing options...
fatbikedude Posted January 8, 2004 Report Share Posted January 8, 2004 best part of Quote Link to comment Share on other sites More sharing options...
brian r Posted January 8, 2004 Report Share Posted January 8, 2004 Aren't they Hebo's? Quote Link to comment Share on other sites More sharing options...
wayneg Posted January 12, 2004 Report Share Posted January 12, 2004 (edited) I have put some on my '00 Rev3 with no problems. They were available as a Beta part with the new clamps for '98 Beta Techno's, and are only available in red. I suspect that they are Domino handlebars. The total cost was NZ$260 including the clamps, so should in theory be available from the UK Beta distributor for less than 100 pounds. Bloody good handlebars anyway - I haven't even bent them yet, and I do crash fairly frequently...... Edited January 12, 2004 by wayneg Quote Link to comment Share on other sites More sharing options...
jrsunt Posted January 12, 2004 Report Share Posted January 12, 2004 Very tricky mark, on the 04 rev3, the the top fork brace is part of the lower handlebar clamps. The tapered bars arn't a problem, (i fitted a set of renthals to my SY) but they wern't cheap at nearly Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.