southwester Posted December 14, 2013 Author Report Share Posted December 14, 2013 Bike shop agreed that a missing bearing would lead to the symptoms I have and the seal on the master cylinder do give up so I have that on order to I was hoping it would turn up today but no joy. So to make sure I get it right this time is it a good idea to coat the push rods with gear oil on assembly to make sure some gets in there? Cheers Quote Link to comment Share on other sites More sharing options...
dan williams Posted December 14, 2013 Report Share Posted December 14, 2013 So to make sure I get it right this time is it a good idea to coat the push rods with gear oil on assembly to make sure some gets in there? Cheers Not necessary but it couldn't hurt. Quote Link to comment Share on other sites More sharing options...
southwester Posted December 14, 2013 Author Report Share Posted December 14, 2013 Not necessary but it couldn't hurt. Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.