Jump to content

Sign in to follow this  
deanogasgas

Kill Switch Sherco

Recommended Posts

Hi all, and seasons greetings.

Just tried to fit an Apico magnetic lanyard to my 2012 Sherco and its not long enough.. do they do a longer version or will I have to get the heet shrink gun out. Also its a female end rather than a male...

Share this post


Link to post
Share on other sites
 

Hi There. I have fitted 1 to my 2011 sherco and all you have to do is extend the wires, the wires on the end of the switch need to be male, 1 to earth, the other 1 to the cdi wire which is a cut out wire.

Share this post


Link to post
Share on other sites
 

Thought I might have to extend... The two wires on the Apico are one earth and one male. The original Sherco cut off has one earth and one female that connects to the male wire going to the cdi cut out...!!

I will have to change the male for female on the Apico unit.

Share this post


Link to post
Share on other sites
 

I just purchased the Leonelli magnetic lanyard. It appears to be virtually identical to the Apico unit including the short wire issue, unfortunately.

I don't fancy extending the wires - I'd rather replace them. It looks as if the switch can be disassembled - soft silicone (?) sealant under the bar mount seems to be holding it together. Has anybody tried to disassemble one of these units? If so, can I solder new wires to the contacts?

Thanks, Woody.

Share this post


Link to post
Share on other sites
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...