Jump to content

ady witting

Site Supporter
  • Content Count

    81
  • Joined

  • Last visited

About ady witting

  • Rank
    Adam Witting

Contact Methods

  • Website URL
    http://
  • ICQ
    0
  • Yahoo
    adamwitting@btinternet.com

Previous Fields

  • Bike
    Sherco, A/C Yamaha

Profile Information

  • Location
    S.c.u.n.t.h.o.r.p.e North Lincolnshire (England)
  • Gender
    Male

Recent Profile Visitors

3,212 profile views
  1. ady witting

    Scunthorpe Mcc Oset Training Event

    until
    Oset training event for Youths and Parents 4 Sections Refreshments Available Starts From 5pm until 8pm Kirton Off Road Centre (Korc Sport) Gainsthorpe Road Kirton In Lindsey DN21 4JL Contact Scott on 07748155264
  2. ady witting

    2016 Sherco Carb set up

    Hi there i have a 2016 300 with a Keihin Carb and 48 Pilot Jet and 128 main jet standard needle and needle set in middle and air screw at 1 1/2 turns out, but it seems to run on slightly sometimes i am thinking its running weak
  3. Yes you should be able to ride around before the start but not the sections. I would take 1 can of petrol with you. If you come and see us there we will sort you out and my dad will run the bike with you. We are in a big Blue Renault Master with Holmestead on the side of it. (Reg EY08 DCE) We will be there from about 9 - 9.30 ish. it starts at 10.30/ 11am .
  4. Hi, Yes you can have a bit of practice before the trial once u have got entered but not the sections, usually we get the 1 hour before the start
  5. ady witting

    2016 Sherco 300 Carb Jets

    I've just changed my carb settings now, left the pilot jet at 45, changed the main jet from a 125 to a 128 and needle setting to 1 up from bottom, going to try this setting at trial on Sunday (Lincoln). hopefully this setting should be ok.
  6. Hi, Lincoln have a Trial Next Sunday 10th Jan at Manton Quarry Nr Scunthorpe (DN21 4JT) Scunthorpe have one on 17th Jan Next to Eddie Wright Speedway Stadium (DN15 8QZ) Banovallum have one on 24th Jan at South Thorseby Quarry Nr Louth (LN13 0AW) Pegasus have one on 31st Jan at Castle Bytham South of Grantham off the A1. (NG33 4QW) The Easy Route at all these Events is very suitable for a Beginner, and will all make you welcome Have a Look at the Link below which gives you all this year trials and dates around this area http://www.motorcyclesport.org.uk/trials_dates.htm
  7. ady witting

    2016 Sherco 300 Carb Jets

    Thanks Guys for all your comments. Will take your advice
  8. ady witting

    2016 Sherco 300 Carb Jets

    Does anyone know what jets I should be running on my carb its a kelhin flat slide
  9. ady witting

    2016 Sherco 300 Mixture

    I was going to get a 250 but I tried a 300 at demo day, and thought it suited me more, they are easy to ride, good on power. if I was you I would go for a 300 but try it first
  10. ady witting

    2016 Sherco 300 Mixture

    Thanks to all your comments guys, I am blaming myself Scott lol
  11. ady witting

    2016 Sherco 300 Mixture

    Hi, I've just bought a 2016 300cc and I was wondering what the mixture screw turns should be so its set right for me its a kelhin flat slide carb on it
  12. ady witting

    Kill Switch Sherco

    Hi There. I have fitted 1 to my 2011 sherco and all you have to do is extend the wires, the wires on the end of the switch need to be male, 1 to earth, the other 1 to the cdi wire which is a cut out wire.
  13. ady witting

    Drayton Bantam Forks

    Hi there, I was wondering if anyone knows what length the forks should be from the top of the top yoke to the centre of the wheel spindle, on my dads Drayton bantam.
  14. ady witting

    2011 St250 Air Mixture And Jets

    Hi, I was wondering if anyone knows what the air mixture should be (How many turns out) on my bike, and I have also fitted a s3 titanium front pipe do I need to change any jets.
  15. ady witting

    X Light Rear Tyre

    Hi everyone, I've Just bought a second hand X Light, but it has 2 sidewall cuts, it takes a week to go down. should I change to a different tyre or just keeping blowing it up.
×