March 17, 20179 yr Hi folks just to but in. My 300 I kick it over 3 or 4 times very slowly when cold before I press the button and give it one hell of a kick. More or less first time starter even when sitting a while.Not so good when hot as if I try with a sort of half assed kick I normally end up kicking it 3 or 4 times. To be honest I'm not sure if the battery is ok as I've never changed it and the bikes done a bit work. While I'm on I recently drained the fuel tank (Tipped the bike upside down) plenty water and rubbish came out. Maybe worth doing to help the filter and maybe save a pump ? Cheers the noo.
March 17, 20179 yr I had the flywheel off last week to check the crankcase screws and could see someone drilled out the bolts and removed the weight also is it supposed to have a magnesium flywheel cover?
March 25, 20179 yr On 2017-03-16 at 7:21 AM, ossabc63 said: Canada280 iam in the okanagan bc i pm you in dec. the only wires that would be backwards would be my led which wouldnt make a difference. Bikes apart now lubing linkage and had a bad wheel bearing. Then will try sucking out some fuel to see if light goes out. ? scratch what I said earlier, I now wonder if the official ossa fuel indicator is an led or regular bulb? This now has me perplexed. Mark, can you tell if the light on your explorer is led or regular? Regardless of how much fuel is in the bike an led bulb is either lit all the time or off all the time depending on which way I wire the bulb so I wonder if a regular bulb that accepts a charge regardless of how it is wired is the key.......or is my sensor just screwed because the led bulb just stays lit regardless of fuel level.......questions questions questions.....on an issue that is meaningless and now just an annoyance! Edited March 26, 20179 yr by canada280i
March 26, 20179 yr Sweet canada280 i will try that still waiting for my wheel bearings from ebay. So i can put my bike together again.
March 26, 20179 yr I just revised my earlier post as it still does not work.......just an annoyance now!
March 26, 20179 yr I just revised my earlier post as it still does not work.......just an annoyance now!
March 26, 20179 yr I just looked. It is definitely an incandscent. Edited March 26, 20179 yr by lotus54
March 27, 20179 yr that looks like a specific type of bulb, automotive? I need to find out the voltage output from the connector and then try to find something suitable
March 27, 20179 yr I will get the number form the bulb. the gauge itself is TrailTech - I will check their site and see if they have bulbs that fit also, mark http://www.trailtech.net/digital-gauges/vapor/vapor-accessories/022-pda Edited March 27, 20179 yr by lotus54
March 27, 20179 yr looks like the bulbs that are used now are all LED as the instructions indicate.....still a mystery in progress
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.