ric h Posted September 17, 2018 Share Posted September 17, 2018 .I am the owner of a 2011 Ossa tr280i in Ontario Canada.It has the original rear hub bushing/bearing setup and it is need of a new bushing. I believe the skf # is "pcmf 353916 e".I know that there was a kit available at one time to convert the hub to bearing/bearings with a new pair of spacers.Does anyone know where i can obtain them? I tried local bearing suppliers,but they have a minimum order of $255. Thanks,Ric Quote Link to comment Share on other sites More sharing options...
ossabc63 Posted September 17, 2018 Share Posted September 17, 2018 Just a dumb answer, did you phone matt at dualsportplus. Cheer kim Quote Link to comment Share on other sites More sharing options...
peterb Posted September 17, 2018 Share Posted September 17, 2018 Hi Ric, we machined out the hubs to fit ball races, 60042RS from memory, and made up a wheel spacer to suit, with the tyre off, the wheel can sit flat on a large milling machine table. Pretty sure the kit was just a sleeve and a smaller than 6004 ball race. Bye, Peter B. Quote Link to comment Share on other sites More sharing options...
ric h Posted September 17, 2018 Author Share Posted September 17, 2018 1 hour ago, ossabc63 said: Just a dumb answer, did you phone matt at dualsportplus. Cheer kim Yes.They couldn't help and referred me to Lewisport who is yet to answer my 2 emails after a week. Quote Link to comment Share on other sites More sharing options...
ric h Posted September 17, 2018 Author Share Posted September 17, 2018 36 minutes ago, peterb said: Hi Ric, we machined out the hubs to fit ball races, 60042RS from memory, and made up a wheel spacer to suit, with the tyre off, the wheel can sit flat on a large milling machine table. Pretty sure the kit was just a sleeve and a smaller than 6004 ball race. Bye, Peter B. That'll be a last resort.The bushing isn't as good,but hey,it lasted 7 years.Another bushing would be fine and no more than $10 if i could buy just one.Thanks. Quote Link to comment Share on other sites More sharing options...
canada280i Posted September 18, 2018 Share Posted September 18, 2018 If that is the correct part number a quick search turned up this link to order one for $20: https://www.applied.com/c-skf/pcmf-353916-e/GLYCODUR-BUSHINGS/p/101511349 Quote Link to comment Share on other sites More sharing options...
lotus54 Posted September 18, 2018 Share Posted September 18, 2018 In general, email isn’t very useful to Lewisport. I find I need to call. Quote Link to comment Share on other sites More sharing options...
ric h Posted September 18, 2018 Author Share Posted September 18, 2018 8 hours ago, lotus54 said: In general, email isn’t very useful to Lewisport. I find I need to call. Thanks guys.Lewisport finally got in touch with me.I'll see what they have.They were at the Nat's...duh! Quote Link to comment Share on other sites More sharing options...
ossa68 Posted September 18, 2018 Share Posted September 18, 2018 https://trialstribulations.net/index.php?main_page=product_info&cPath=35&products_id=3060 Quote Link to comment Share on other sites More sharing options...
ric h Posted September 18, 2018 Author Share Posted September 18, 2018 1 hour ago, ossa68 said: https://trialstribulations.net/index.php?main_page=product_info&cPath=35&products_id=3060 Thanks,but it's sold out. Quote Link to comment Share on other sites More sharing options...
pauls320 Posted September 20, 2018 Share Posted September 20, 2018 If Lewisport or Birketts do not have the parts for you and ya do not wish to machine it out like Peter's good suggestion, should be no big deal lacing in a standard ball race hub like other brands use...maybe trials bike breakers in uk?? Quote Link to comment Share on other sites More sharing options...
ric h Posted September 21, 2018 Author Share Posted September 21, 2018 On 17/09/2018 at 9:23 PM, canada280i said: If that is the correct part number a quick search turned up this link to order one for $20: https://www.applied.com/c-skf/pcmf-353916-e/GLYCODUR-BUSHINGS/p/101511349 Thanks bud.They are on their way from SKF. Quote Link to comment Share on other sites More sharing options...
canada280i Posted September 21, 2018 Share Posted September 21, 2018 Gotta keep these old ossa’s running!, Quote Link to comment Share on other sites More sharing options...
ossa68 Posted October 11, 2018 Share Posted October 11, 2018 https://www.dherbeymoto.com/marchand/piece_detachee_p2.php?num_rubrique=4&num_type=134&num_produit=10818&page=piece&num_rub=4&type_recherche=moto Quote Link to comment Share on other sites More sharing options...
ric h Posted October 11, 2018 Author Share Posted October 11, 2018 Thanks.I already ordered a couple of bushings,but i might order that as well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.