Cotapin Posted April 4, 2019 Report Share Posted April 4, 2019 I've just joined the forum and I'm hoping that someone can advise me on how to remove the retaining nut on the front sprocket. Is it normal right hand thread or is it left handed and I'd there a way of locking the output shaft without damaging it when trying to undo the nut. All advise greatly welcome, cheers. Quote Link to comment Share on other sites More sharing options...
nh014 Posted April 4, 2019 Report Share Posted April 4, 2019 Turn the counter shaft sprocket nut clockwise to loosen it. This also applies to the magneto / flywheel nut. They are most easily removed with an impact hammer. Quote Link to comment Share on other sites More sharing options...
feetupfun Posted April 4, 2019 Report Share Posted April 4, 2019 Leave the chain on and you can jam the wheel to hold the sprocket still to undo the nut Quote Link to comment Share on other sites More sharing options...
Cotapin Posted April 5, 2019 Author Report Share Posted April 5, 2019 Thanks guys. I'll give this a go and see how I get on, cheers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.