mcman56 Posted June 18, 2023 Report Share Posted June 18, 2023 Can someone clarify how to install the front sprocket retention hardware for a TL250?. There is a flat washer with cut outs to slide on the spline. There is a second washer with similar cutouts which also has some horizontal protrusions that will mate with the first washer. However, I don't see how these two washers can mate once on the spline. Then there is an e ring that fits but is not a tight fit in the groove on the spline. Quote Link to comment Share on other sites More sharing options...
lineaway Posted June 20, 2023 Report Share Posted June 20, 2023 The middle washer was just a spacer and the circlip. Should be fine, not ever a real tight fit. The sprocket just has to be on the splines. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.