burns1989 Posted January 31 Report Share Posted January 31 Hi all where can I get the difrent sized shims for the clutch adjustment as my clutch slips badly when the clutch gets hot. Thought I was wheel spinning antill my m8 said its not spinning the wheel. Quote Link to comment Share on other sites More sharing options...
dan williams Posted February 1 Report Share Posted February 1 (edited) Receipt 40105424.PDF https://www.mcmaster.com/products/91437a555/id~16-mm/thickness~0-005/ https://www.mcmaster.com/products/91437a555/id~16-mm/thickness~0-005/thickness~0-01/ Edited February 2 by dan williams Quote Link to comment Share on other sites More sharing options...
burns1989 Posted 1 hour ago Author Report Share Posted 1 hour ago On 2/1/2026 at 8:20 PM, dan williams said: Receipt 40105424.PDF 200.77 kB · 56 downloads https://www.mcmaster.com/products/91437a555/id~16-mm/thickness~0-005/ https://www.mcmaster.com/products/91437a555/id~16-mm/thickness~0-005/thickness~0-01/ Thanks, found out the rev 3 shouldn't have a shim at all exept the bearing washer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.