simon0116 Posted yesterday at 09:28 PM Report Share Posted yesterday at 09:28 PM Fitted a electronic ignition as instructuons say. Now ty will only start by putting a drip of petrol down bore. Good spark, new petrol, clean carb, reeds look ok. Timing is 2-3mm measured with strobe. Once running rev/ rides fine. Kicks back up ok. Only tried it for 10mins running Any ideas before i put old ignition on to prove a point, or is 200 majesty timed diffent to a ty175 Thanks Quote Link to comment Share on other sites More sharing options...
feetupfun Posted 22 hours ago Report Share Posted 22 hours ago It should start easily at 2-3mm BTDC. Did you do anything else at the same time as fitting the new ignition? Quote Link to comment Share on other sites More sharing options...
simon0116 Posted 14 hours ago Author Report Share Posted 14 hours ago No just changed stator plate and fitted kill switch cdi etc that comes with it.. Quote Link to comment Share on other sites More sharing options...
kurtas Posted 1 hour ago Report Share Posted 1 hour ago Are you trying to start it with the Carby choke on? Will it start once it has been started and warmed up? I would also check the plug lead is screwed in properly, if that was changed with the electronic ignition. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.