18 replies to this topic

[jsp]

No theres only wheel spacers which fit in the bearings and
there both there, did try using a washer but it did the
same, then when i removed the bolt and cam from the brake
side you could see the mark that the spindle had made.
which ment everything is tigtening up to the spindle but
that isnt enough to tighten the wheel in the swinging arm

jsp

[sunlingkau]

let me check

[borus]

With the new rear bearing kit the alxe length is maybe 1mm too long. Simply shave 1mm off the end of the axle or grind and you will find no issue.

cheers

[jsp]

thanks for the info everybody, i will get it sorted
and keep an eye on it

jsp