Jump to content

robk

Members
  • Posts

    4
  • Joined

  • Last visited

Contact Information
 
   
  1. Hi Chris Torque settings are there for a reason as worked out by the manufacture so adhering to them is important. Also if you do have a failure you can rule out overt-tightening or under-tightening of a nut or bolt if the correct torque has been used. It is good practice so I would advise the purchase of a torque wrench that covers your needs. regards Rob
  2. Very sad to hear about Len. He was a very friendly person and always a pleasure to watch with his fantastic smooth riding style. I feel privileged to have known Len and occasionally ridden the same trials with him. My sincere condolences go to Bev and family. R.I.P. Len Rob Knowles
  3. I wish I could make this Trial but committed to other things. Managed to ride two rounds this year the Oxford Ixion round and the great Bognor club (Run by Tony Martin and Co) organised round at Butser Lime-works. Both great Trials and riding two laps with 20 sections is excellent with section severity spot on. Agree with wobbler hope the organisers get the dates out early and i will be able to ride more if not all of the rounds. Again agree with wobbler great series and hope it continues Rob Knowles
  4. Best wishes to Len and his family One of the smoothest riders I have had the pleasure of watching and occasionally riding with. Keep on fighting Regards Rob Knowles
×
  • Create New...