JGAS (Formerly Jotagas)

I have been trying to access their site, which I did use earlier in the week, but for the last day or so the address appear to be no good. I have also been awaiting an email reply, but that has not come. Does anyone know the state of the company? Spencer

Bought a new cdi for the bike and my bike does not have a switch on.Apparently the switch makes the bike softer or the other way around,I wanted to no wether mine's running on the softer setting or not think it's the red and yellow wire.Wonder which way around it is!!!earth it to go softer or more performance???.As I want it running on the revvy side.If I have to earth the wire can you show me pics of yours for an idea thanks.

Hi everyone new to the trialling game,did the 250 have pinking problems as well?

The manual recommends 0W75 Gear trans oil, but I cant find that oil anywhere. What are you all using?

Stand Moto in France have taken delivery of one maybe more....?? Price tag 6450 euro so 5700 to 5800 quidish. Ohlins on back and tech on the front by looks of it.

Hi Guys really appreciate all your help so far many thanks, however I am struggling to find parts for the Jotagas I really need:- * Water Pump Shaft * Bearings * Seals I have tried Vince at Haven but struggling to contact him at the moment is there any other places selling Jotagas spares in the UK please??? I Really need to get this bike done and sold for my dad as it's been sat a while now and its a shame parts are'nt available like Gas Gas or Sherco etc, many thanks Simon.

Hi all recently bought a new to me 2012 jotagas 300 I could sometimes hear a slight ratcheting noise like the Kickstarter was slightly engaged whilst running. I have taken the casing off and found that there is a 2 holes on the waterpump/clutch casing side that im guessing the Kickstarter pawl is ment to be bolted into but it appears to have pulled out of casing and elongated the holes any advice will try and upload pictures

Hi guys I have water in my gearbox so its time to change the water pump seals and shaft, however on dismantling the side cover I realise you have to take the engine out to change the water pump seal as the complete side cover for the gear box wont come completely free due to the Frame being in the way ?????? I have had the engine out before to do a complete rebuild I should have maybe changed seals then but I didnt think, Any suggestions please?????? Many thanks i advance.

Does anyone know if there's any plans for a 2018 Jotagas.

Hi, does anyone know a link that works for an online spares manual for the jotagas 300 2013?

Any body know if a gasser 300 head spacer will fit my 2016 jotagas 300 it has the gold S3 head insert fitted but still pinking when hot ?? Cheers for any help ?

Hello all, Mark here from Au. I'm new to trials and looking at what the seller believed to be a 2015 250 Jotagas, however neither of us are sure of the bikes age based on Jgas images of the 2015 models. The serial number is: UCPJT300115074007# if anyone can throw some light on it. I've contacted JGas, but as yet no reply. Happy trials all.

Found this on YouTube the 2017 jotagas walk round

I've had problems with front brake pressuring and the lever going hard and brake staying on, stripped brake caliper, 1 of the pistons pushed back easily but the others have been very difficult, managed to get 2 more back but can't seem to get the last one back, any suggestions?

Haven have new Clutch covers and they are made of Alloy instead of Magnesium. SHould last a bit longer than the old ones.

Has anyone seen the new 2017 Jotagas? I was shown a Picture Saturday of what was said to be the new 2017 model and it looked Lovely.

Jotagas website seems to have disappeared !! anyone know a reason ??

Hasn't been much activity here so thought I would offer some things I have recently done to my 2015 JGas JT250: Fitted an OKO 26mm carb – model K103BT - http://oko-australia.com.au/trials in replace of the standard Dellorto PHBL26. Stayed with the 26mm OKO rather than a 28mm due to the type of riding I do (i.e. no splat walls) and apparently easier to tune, jetting and air-screw wise. To fit the OKO, I used the JGAS accessory intake manifold part for Keihin PWK carby’s to accommodate the larger diameter needed. Fitted a 5mm intake manifold spacer – http://trialparts-shop.de/en/shop/jotagas/vergaserflansch-jotagas/ which accommodates the slightly shorter length of the …

Hi all I've purchased a Jotagas and want to put the suspension back to factory settings but can't find them anywhere on the net. Can anyone help me please thank you

Could anyone tell me what gearbox oil and how much it should take for my 2014 300. Thanks