Jump to content

tiptop

Members
 View Profile  See their activity

  • Posts

    13

  • Joined

  • Last visited

 Content Type 

Posts posted by tiptop
 
 

  1. 09 Evo Notchy Gear Box

    in Beta

    Posted

    Have just changed the gearbox oil (Belray) in my 2009 Evo 250 2T and still my gear box is very notchy.

    Anybody else experianced this or anybody any advice please?

    Hope this isnt bad news!!!

    Thanks in advance for any help/advice..

  6. Beta Evo/rev 3 Air Box Mod

    in Beta

    Posted

    Chewy:- I linked the same guide in my post. I was hopefully looking for a little bit more detail.

    Timp:- Think its when im washing it. I have covered to vents to the rear of the rear mudguard but it still gets in somehow?

    Think I may still have to cosider the valve mod but need to know a bit more detail prior to attempting it. As to take mudguard off and do the stick/sponge thing all the time would work but be a bit of a pain.

    Cheers

  7. Beta Evo/rev 3 Air Box Mod

    in Beta

    Posted

    Hi There

    I am having trouble with water getting in my Evo airbox are not able to drian or get it out properly.

    I read in another post on TC there is a mod which involves insalling a valve on the botton that will allow the water to drain out.

    It does briefly dercribe the mod on page 4 here http://www.trialscentral.com/forums/index....mp;id=6943...it

    Can anyone shed anymore detail on this altertation as I dont want to butcher the airbox? eg type of valve to use, size of hole to drill etc etc

    Again your help as always is apprecited.

  9. What 2 Stroke Oil?

    in Beta

    Posted

    Hi

    Have recently purchased a 09 250 Evo which has been run on Ipone samuari strawberry oil.

    Personally I had never heard of such oil and used castrol TTS in previous bikes.

    1. What is your personal experiances of this Iphone oil?

    2. Should I stick with using the same oil?

    3. would it matter changing to TTS now?

    Thanks in advance

  10. Beta Evo 250

    in Beta

    Posted

    Jezza

    A wise response thanks.. I guess I better look at getting the rear wheel hub renewed ASAP, bugger :rolleyes:

    Would anybody have an idea of cost or the best place to look for a second hand one if they are silly money?

  12. Beta Evo 250

    in Beta

    Posted

    Hi there

    Just purchased a lovely 09 Evo 250 and have just noticed a nasty chunk missing out of the edge ofthe rear wheel hub. The bit missing is approx the size of a thumb nail and exposes some (but not all) of the right hand side wheel bearing.

    Is this something I should be concerned about or shall I just closley monitor the situation?

    Any help/advice offered here would be greatly appreciated.

    Thanks

  13. Evo Rear Plastics Bolts Not To Clever...

    in Beta

    Posted

    Ive recently purchased the same bike and have a similar problem!

    I would also like to know how the mesh grills on the rear mud guard is supposed to be hled on. As mine has been crudley siliconed on?

    There is also duct tape over the vents on the underside, I assume this is to prevnt water ingress to air box?

    Any help offered would also be greatly appreciated to me.

    Pipster. hope you dont mind me hijacking your thread, sorry!!

    Thanks

  
×
  • Create New...