bondy

Hello what you guys using for the TY 80 engine paint silver? cheers

thank you could you get the manifold still made?

Hello brewtus what mikuni carb modle is that? and dose it work ok on the ty 80? cheers chris

Hello I have a TY 80 dose any 1 know if there' s a After Market Carb? TA

yes its a while ago I need to find out how to get the old flat bearing out and replace it with new

Hello paul how did you get the old ball bearing out the clutch Arm? also how do you replace it as I have 1 that needs replacing

inmotion

How much coolant gose in the rad?

Hi I have 2 scorpa sy can you tell me what the standard piston was on the sy 250 and what they whent up to?

Hello guys thanks for your help I have managed to remove the studs with 2 nuts screwed on the stud then undo the bottom nut witch undose the stud head came off easy I want to take the piston off anyway to de coke the top the barrel looks very clean thanks guys once again.

Can any body tell me how to take the cylinder head off the sy? I've striped bike down rad off ECT the head steady is stoping the head coming off I was hoping to get away from taking the motor out is there a nack am I missing something? I want to replace the small end bearing am not new to striping and rebuilding bikes just never done a scorpa before I have the New parts to hand to do the work so frustrating. Cheers

Hello peter B thanks for the Reply I was just inquiring but now you said it the bike is Quiet so ill leave it ive cleaned the exhaust out and I have a brand new front pipe so am putting that on cheers Bondy.

You could get that welded not ideal but will save it

Hello All can some 1 tell me witch packing do you use to repack the sy silencer? Pad tho or the loose stuff? Also is it worth doing the bike is running ok I've just striped it down to clean the carb and I've flushed the exhaust I've put a brand New front pipe on it also.

cheers buddy i cut a Allen Key Down with my trusty Dremel did the job ok any tips for putting the New o rings back in the exhaust?

hello ive done it as you say cut a Allen key job

can anybody tell me how to get the front L/H slotted bolt out? i cant get a Allen key to in to undo it is there a knack to do it cheers.

thanks for the Reply M I also use the TT trial pro good stuff

will 70-1 be ok for the mix of 2 stroke oil in the fuel?

the case covers was from Andy Kelly the wheel decals was on the bike when I bought it hell team sell them. yes the rear guard is tie wrap and drilled I just use silicon to seal. bike will be on the classified soon.

my scorpa 2007

that's good thank you the bike is finished now

top and bottom chain rubber for a 199A Works well the top slipper i just used a self taper bottom slipper 2 bolts easy job no more rubbing.

should there be any kind off rubber under the fuel tank?

When it's finished I will up load photos not be long now