bondy

keith ive had i slight pinging noise coming from the clutch case side ive fited new clutch and the bike hasnt had a good run seems to stop when the clutch is pulled in bultaco said its probely the plats didnt make this noise when i first got it so may be the plats just need beding in?

hi keith im still learning got to keep chiping away. i askt bultaco uk they didnt know about these nuts may be your right i may have the wrong spindel did the late bultacos not have the castle nunt. the only bultacos i grow up with was the older ones

hi guys where can i get the rear wheel nut from the nut with slits in it so you can get the split pin in the spindel. ive got a new nut off bulaco uk but its not the one bultacos used to have i hope i can get one from some where can anybody help me please

hi thanks for your help

cheers pete ill see if i can get a spring if not ill try some of the tubing

hi guys anybody know where i can get a outer spring for my clutch cabel just to protect the cabel from heat of the engin? the yamaha ty used to have one ive look on the net but cant find one or could i make one?

hi all im in the middel of tarting my 199A ive took the barrol off and cleaned and resprayed took piston off to just check it looks ok. theres no damage to the ring but they was easy to get off there was loads of comprestion before is it worth changing them?

hello all im at loose end im trying to put a new return spring on my 199A but not having any joy. ive got the bit in the shaft now i need to wind the spring so its coiled when the kick start is back so when its free it returns but i havent got a clue how to do this please help

hi the kick start ruber is the one i want in your second photo. the one with the bultaco logo on it seems to keep tearing when im kicking the kick start. i didnt know that bultaco uk did the other typ i will get one thanks for your help bondy

hi all ive got a 199A anyone know what other kick start ruber that will fit? ive had to from bultaco uk and they just keep tearing ive lookt at the yamaha ones they look alot more thicker but its if they fit my bult anyone any ideas

thanks for the photo ill just do it as you say with out the torque im having the barrol helicoiled cheers bondy

hi all just puting me 199A 350 motor back in the frame just wounderd if anybody knows if any what touqe setin is the cylinder head nuts and bolts? ive got the manual but dosent say

hi martin is it worth me buying some decals for my new poly tank?

cheers patrick

thanks ill check cheers

hi its ok i somtimes get mixed up

hi all anybody know where i can get a old typ fuel tap from screw in typ?

hi all i need your help my 199A runs fine since retoring it only been up and down the street she pulls well shes had new clutch in when shes ticking over theres a littel nose cumming from the clutch case sounds like a shacking a tin of spray paint if that makes any sence? its not consent just evrry now and then i put new wire throw the clutch nuts its not that coz i cut the ends down and its not the nunts there missing the case.and the chain was ok so i dont know without taking the cover off witch i didnt really want to do coz i put gasket sealent on its the blue stuff what dosent set hard so i sopose it would come of easy any ideas please?

hi all ive just got a new plastic tank. and was adviced not to put decales on as they come off when you put fuel in the tank is there any way round this? ive got the round badges was told they are ok because they have foil backing. any help would be greatfull

cheers john ill keep it blue.

hello all ive got 2 199A both in blue i want 2 know if they did this model in red? if they did whats the colour was the frame? i was thinking off changing one so ive got one in blue and one in red

hi again think ill paint it black might look daft. geting back to the return spring when you put it on do you have to have the shaft winded back so then it will return? cant get me head round it thanks for the sketch.

hello nice engin thanks for the addvice. ive sprayed my cylinder head black would you think it would be ok if i lelft the barrol siver? can you tell me how to put the kick start return spring on?

hello all ive just had my barrol sand blasted i covered both ends with strong duck tape.and ive tryed the bolts that hold the head down.and they seem hard to screw down the threads look ok on the bolts i was told to clean the thread holes out with a air line any ideas please