I have ordered the honda cg front mount which will be attached to the down pipe at the front that will need extending and then will remove the 2 bits that go underneath the original engine then have some brackets made up to attach the rear mounts also going to add a alloy bash plate to brace under the engine ! That's the plan anyway
Hi Glenn I bought the frame off someone who bought a house and it was in the cellar thinking I would pick up a engine to fit and get it going but searching about realised its not a easy job ! Honda engine seems the way forward although all my bikes have been 2 strokes so know nothing about 4 strokes . I'm going to look at a engine on Sunday and I will post a picture as to size mountings etc once ive made any alterations then will get the frame powder coated ! Do u recommend any other frame mods before getting it coated ?
thanks for the reply i understand about the mono engine ! would a swing arm off another fantic twinshock fit ? ( one with a fantic engine ) if not which honda engine would you use ?
looking for any info on engine type ? i know originally it had a minarelli engine ! can i fit a 80cc air cooled mono engine ( with mounting mods ) or any other suggestions to get this back to where it should be
thanks in advance steve
HI DID YOU GO ANY FURTHER WITH THE PROJECT ? I HAVE JUST GO A FM330 FRAME AND WANT TO BUILD A TWINSHOCK 80 0R 125 IF POSSIBLE THE ORIGINAL MINARELLI ENGINES ARE HARD TO FIND IN THIS COUNTRY AND INFORMATION WOULD BE HELPFUL CHEERS STEVE
HI I HAVE JUST PURCHASED A FM330 FRAME WITH WHEELS AND LOOKING FOR A ENGINE AND OTHER BITS AS MUCH INFO ON THE ENGINE AS POSS ! DID YOU END UP GETTING THE BIKE ?
THANKS STEVE
HI JUST WANTING AS MUCH INFORMATION ON THE FM 330 OR 43O AS POSSIBLE ! I HAVE PURCHASED A 330 FRAME AND WHEELS AND TANK AND WOULD LIKE TO BUILD A BIKE 80CC IF POSS IVE BEEN TOLD THE FRAME IS THE SAME SO ON THE LOOK OUT FOR ENGINE SEAT ETC ANY INFO WOULD BE GREAT CHEERS STEVE