Jump to content

duke750

Members
  • Posts

    18
  • Joined

  • Last visited

Everything posted by duke750
 
 
  1. duke750

    TY80

    Hi , im looking buy a sidecar for Yamaha TY80 , or anyone who,s built one ?
  2. duke750

    Ossa Gripper TR80

    Thanks rms , i think i have found one . If it dosent work out i will bear in mind what you said . Regards .
  3. duke750

    Ossa Gripper TR80

    HI , Im restoring an OSSA TR80 and looking for a sump guard for it . Thanks .
  4. I HAD A NEW FANTIC IN APPROX 1979 , IT WAS SOLD AS A 175 FROM FANTIC UK . IT HAD A SUZUKI PISTON AND IT WAS DONE BY VIC MADELY IN WALES FOR ROY CAREY AT FANTIC HORNCHURCH ( IMPORTER ) . IT WAS JUST A FEW MORE CC,s TILL THE 200 (156) CAME OUT . HOPE THIS HELPS .
  5. I used to carry my trials bike on a trailer . the easiest way I found , was to have 2 x loops in trailer floor (providing base is good) made with good strong webbing / strap material . determine what length they need to be with suspension about half / three quarters compressed . wheel bike onto trailer , put 1 loop over footrest pull bike to opposite side - put 2nd loop over footrest .make sure straps are on pivot part of footrests , not on sharp serrated part . just a couple of secondary straps to bars or frame . if in any doubt , where loops go over footrests , use a wear sleeve or pad to stop loops getting worn . hoe this makes sense .
  6. hi , depeding on how bad the hub is , you could either use bearing fit , made by locktite or similar . or if really excessive clearance , you may have to get hub machined and fit a sleeve or find a secondhand hub/wheel . hope this helps .
  7. i think picture 32 is Mike Skinner .
  8. duke750

    Fantic

    hi , this one looks like chris sutton to me , great pictures .
 
×
  • Create New...