That's just what vertigo uk advise I was up there getting it tweaked abit and they say half / full throttle and kick hold until revs pick up,I don't know if that's right or not but if factory say that who am I to argue!!
Spoke to them today and looks like the capacitor has blown carnt fault there after sales a new capacitor is in the post to me all under warranty top after sales
The full throttle is how vertigo advise starting them hold full throttle kick it and let go when the revs pick up don't no why but that's what they advise and no 1st problem I've had and bikes 4mth old
The bike starts but immediately dies if you hold the throttle wide open after kicking it the bike revs then dies then revs then dies it keeps doing this until you let go of throttle then it dies it's as if someone holding the kill button but tried a new one and a new plug
Hi Im repairing a 2007 125 for a friend who recently bought the bike as a non runner as it wouldn't engage any gears. I've striped the couch basket out and the casing to find the shift fork broken I've replaced the compleate shift fork assembly and rebuilt the bike all good to this point I ran it for the first time tonight and here are the problems I've got it goes up the gears fine but coming back down goes into neutral between every gear and can only find neutral when bike is off between 5th and 6th gear it also grinders the gear when shifting down any help on this would be. Much appreciated many thanks chris
Hi I'm rebuilding a 2007 125 for a friend can anyone advice me on torque settings if any for the clutch basket main securing nut and the 5 or 6 (carnt remember how many at work) spring bolts that secure the front plate to the basket
thanks for reply duffers I have stripped water pump down and its all in tacked and turning correctly will pull flywheel tomorrow and have a look at wood ruff key
Hi I have a 2010 gasgas 300 which is running hot and by that I mean after running bike from cold for about 5 mins the head is too hot to touch I have checked the coolant and topped it up but still hot
I have been told it could be woodruff key? Could it be this?
Hi I’ve recently had a plate welded to the back of my exhaust can due to the rear tyre rubbing through and although it does the job it doesn’t look great (that will teach me for not sorting the snapped bracket out when I first noticed the tyre rubbing ) So I was think of warping the exhaust in a carbon fibre wrap just to make it look a bit better but I a bit unsure whether it work and wouldn't just melt from the heat of the exhaust.
So has anyone tried this did it work? And does anyone know if you can get heat resistant carbon fibre wrap
) So I was think of warping the exhaust in a carbon fibre wrap just to make it look a bit better but I a bit unsure whether it work and wouldn't just melt from the heat of the exhaust.
Vertigo Running Problems
in Vertigo
Posted
Hi Colin 008 the capacitor is just after the battery,
The dabster, the capacitors are £87.08 but too pricey to keep one as a spare