Jump to content

simon0116

Members
 View Profile  See their activity

  • Posts

    16

  • Joined

  • Last visited

 Content Type 

Everything posted by simon0116
 
 
  1. simon0116
    No just changed stator plate and fitted kill switch cdi etc that comes with it..
  2. simon0116
    Fitted a electronic ignition as instructuons say. Now ty will only start by putting a drip of petrol down bore. Good spark, new petrol, clean carb, reeds look ok. Timing is 2-3mm measured with strobe. Once running rev/ rides fine. Kicks back up ok. Only tried it for 10mins running Any ideas before i put old ignition on to prove a point, or is 200 majesty timed diffent to a ty175 Thanks
  3. simon0116
    Points are opening and closing and making continuity when testing manually.
  4. simon0116

    Ty 175 no spark

    simon0116 posted a topic in Yamaha

    Yamaha ty175 Just had full engine rebuild but can't get it to spark. Coil / plug works as tried on another bike and has seperate earth wire from coil to engine, so it's got good earth. Points open, condensor is new. Flywheel is magnetic, new woodruff key How can I test generator/ ignition coil. When I use multimeter from black wire to earth I get 1.6ohms . Getting same on a spare unknown ty windings.
  5. simon0116
    So that sounds about right. Will try charging each battery separate. But still no idea why it's not kicking in. Anyone got any ideas were to test etc
  6. simon0116
    Got a oset 20r on standard Battery and charger. It won't charge. Red light on but no other or fan. So I've pulled connection s apart on charger socket and getting 60v dc. Seems a bit high. Presumed it would be around 48v dc. Is this right,
  7. simon0116
    Hi no had it last 20yrs. Just got it running again. Remember putting hole in a case on one when I was a kid. Right so it must be to do with actual mechanism. Some times there is nothing there on kick start / slipping. Wondering if it's not engaging properly. Will have to look.
  8. simon0116
    Hi got my ty 200 majesty running to day but kick start in only working at very bottom. Seems to be slipping. Shaft end is good and new end on kickstart so only can presume inside. Remember on shaft there is a pressed like part on shaft. And being Told to weld this on to stop slipping. Anyone done this???
  9. simon0116
    Is there any way of making clutch lighter. Ie different lever, oil type or mods. Also rear disc don't linr up in middle of calliper. Think its spacer to long which has worn disc bad, what size fits as its 17 inch wheel. Thanks
  10. simon0116
    Havent looked at bike yet so will it be obvuise the year or is it a letter???. How many digits should there be in a frame no thanks
  11. simon0116
    Wow id be wanting my money back if i had to beat it like that
  12. simon0116
    How can i tell year of beta 50. Going to look tonite at one..liquid cooled, discs. Told its 2004. Any sign on frame eng numbers or date stamps on plastics rims etc.
  13. simon0116
    Sorted it, was aluminium washer not correctly down on shaft, thanks simon
  14. simon0116
    Been told i lost a washer that goes on end of shaft that casing pushes up to? Were can i find a parts diagram
  15. simon0116
    Engine been in bits and Kick start sticks dosnt return. When i loosen 3 bolts nearist shaft on casing it works fine. My sugestion is 2 gaskets. Or have i put something in wrong???
 
×
  • Create New...