Jump to content

Varlo

Members
  • Posts

    57
  • Joined

  • Last visited

Everything posted by Varlo
 
 
  1. Varlo

    Dt250 piston rings

    I installed new rings last night, with expansion ring under lower ring. Give her a run tonight ??
  2. Varlo

    Dt250 piston rings

    Cheers for that! ??
  3. Varlo

    Dt250 piston rings

    There correct rings for dt 250 , not seen one like that before
  4. I've got a dt250 piston for my ty! New rings arrived, in box with rings is a thin 50pence shaped ring! Can anyone tell me where it goes?
  5. Varlo

    Dt piston

    It was off a 78 ty250 , he said it ran ok but I won't know till I try it.
  6. Varlo

    Dt piston

    I got a spare barrel with a dt piston off flee bay for spares, I'm running a wossner at mo, but it's started with piston slap. So I was gonna try spare barrel & piston.
  7. Varlo

    Dt piston

    Hi can anyone tell me if a dt250 piston will work ok in my ty250 twinshock?
  8. Varlo

    Ty250 twinshock

    Cheers for that! I'll give it a go ??
  9. Varlo

    Ty250 twinshock

    I was told larger gap required with electronic ignition, I'll try it with standard gap
  10. Varlo

    Ty250 twinshock

    Can anyone tell me correct plug gap for ty 250 twinshock with electronic ignition?
  11. Varlo

    Ty 250 forks

    Do they make them for ty twinshock? I can only find mono on there web site
  12. Varlo

    Ty 250 forks

    I'm going to order dampers & springs, need to get forks re chromed first
  13. Varlo

    Ty 250 forks

    Thanks for advice ??
  14. Varlo

    Ty 250 forks

    Sounds like a lot of work! will I need the magical damper rods & springs to get my original forks working better ?
  15. Varlo

    Ty 250 forks

    Re chrome sounds like the way to go ?? Cheers
  16. Varlo

    Ty 250 forks

    Thanks for advice ??
  17. Varlo

    Ty 250 forks

    Yes! Good point, they say the magical internals work ok
  18. Varlo

    Ty 250 forks

    I didn't know whether to go down route of fitting mono forks or similar
  19. Varlo

    Ty 250 forks

    Replacing them, there pitted & leaking!
  20. Varlo

    Ty 250 forks

    Hi! I'm thinking of upgrading my ty250 twinshock forks, could do with some advice on what forks work well ?
  21. Varlo

    Bogging down

    It had rebore & wossner piston 6months ago! & electronic ignition 2 week ago! Just spoke to John at ty trials! He said it could be pulling air in when engine gets hotter than normal
  22. Varlo

    Bogging down

    I'm going to try it later after work! I'll double check filters just in case
  23. Varlo

    Bogging down

    Fuel tap is new & it has an inline filter! I pull tube off carb to make sure it ran through. The only thing I've done is put a new air filter on & oiled it. Could it be engine temp as I've not had it running for this length of time stood still.
 
×
  • Create New...