Jump to content

Brand0n

Members
  • Posts

    10
  • Joined

  • Last visited

Contact Information
 
   
Recent Profile Visitors
 
 

The recent visitors block is disabled and is not being shown to other users.

 
  1. Hi folks just a quick question to see what people are running suspension setting wise? I have a 2018 sherco factory 300 tech forks and reiger shock, I weigh around 70kg got factory springs fitted. Just looking to see what people are running the clicker at! Cheers.
  2. Did anyone find our what the exact bhp a 300 sherco is? Currently trying to figure out the same a2 license limit for my bike. Many thanks!
  3. Brand0n

    Sherco hunting!

    Will it just be a case of getting the crankshaft seals replaced, is this possible without splitting the engine down? Also roughly what would this likely cost if it's something you've ever had done or experience with?
  4. Brand0n

    Sherco hunting!

    Hi everyone I've had my sherco for around 5 months now had abit of bother with the bike hunting and or reving right up after a touch of throttle and not coming back down to idle, also when the bikes set to a nice idle it just cuts out I've got fuel mix etc set to standard, ive recently cleaned the carb, new carb to air box inlet replaced, full cable etc.. it's slowly doing my head in and difficult to keep the bike at slow speed without it wanting to cut out or reving it's bollocks off! Just wondering what else there is to check or needing replaced on it? I've also tried the carb/ soapy water trick on the gaskets Also if the bike still fine to use with this issue? Lastly the bikes has a little white smoke coming out from a cold start then goes away is this normal? Any info to these questions would be greatly appreciated! Cheers, Brandon
  5. Hi guys new to trials and learning as I go, really getting into it all and loving the sport coming from an mtb back ground. I'm looking to change the oil on my sherco 250 it's recommended using 10w40 oil and 450ml to fill up with, just wondering what oil people recommend, also does it need to be light gear oil, fully synthetic and so on. Just looking to see what's best for the bike. Cheers again, I believe previous owner used rock oil light weight gear oil. Cheers, Brandon
  6. Hi guys recently picked up my first bike 2007 sherco 250. I'm just looking for info( as pictued) which way is the fuel on and off. Assuming (on) is lever facing down? Also what's the correct gear box oil for this bike and how much. I can't seem to find this info online. Any info greatly appreciated, thanks all.
  7. Hi guys, just looking for some advice if possible please. I'm looking to start trials at the age of 19 I come from a downhill mtb racing background and would like to try this out on the side for abit of fun, I've previously rode a sherco 290 a handful of times. I have been offered the gas gas txt 280 2007 pictured at £1500 has recently had brakes bled and car re buikt claims to be well looked after, I'm just looking for some advice on what to look out for? or if there is any other brands, model or year people would recommend for starting out? Any help would be greatly appreciated! Thanks, Brandon.
  8. Hi guys, just looking for some advice if possible please. I'm looking to start trials at the age of 19 I come from a downhill mtb racing background and would like to try this out on the side for abit of fun, I've previously rode a sherco 290 a handful of times. I have been offered the gas gas 280 2007 pictured at £1500 has recently had brakes bled and car re buikt claims to be well looked after, I'm just looking for some advice on what to look out for? or if there is any other brands, model or year people would recommend for starting out? Any help would be greatly appreciated! Thanks, Brandon.
×
  • Create New...