Jump to content

yankee99

Members
  • Posts

    22
  • Joined

  • Last visited

Everything posted by yankee99
 
 
  1. The spindle will definitely even them out. So its normal for the right to be a few inches longer than the left
  2. Didn't really see a suspension sub forum so hope its ok to ask here. I am installing some tech forks on my GG. My question is i noticed the rebound fork right side (no spring ) when installed without the fender extends way more then the left fork. Is this normal ? thanks in advance
  3. will check them out thanks
  4. Hi im trying to reduce compression on my 2020 txt 280 and look like it's a 1 piece head so no insert. I've decided to do with a head spacer but can't find them. Can someone recommend where they are available. Thanks!
  5. Hi hopefully this wont be difficult im looking at a 2022 trs one e start and a 2020 gasgas txt 280 pro both are new at the dealer the gasgas is $6500usd otd the trs is around $9000 otd based on price im really leaning to the gasgas but my leg wants trs
  6. somethings just never end like this bike rebuild of mine😫😫 ok here is my problem and really hope someone can help me with guidance. My rear wheel hub and spokes were replaced. When my axle is equal distance from the swingarm bolt the wheel pulls front left hitting the chain guide. So im thinking of 2 possible mistakes. 1. the new spoke come short and long is it possible they used the long spoke on short side and short spoke on long side? 2. the complete wheel is off and all spokes need to be loosened on one side and tightened on the other
  7. This is my 1st trials bike so guess before i go crazy ill ask here. 2002 txt pro AJP front brake caliper and master. Caliper is rebuilt all pistons coming out evenly and release correctly. Brakes were reverse bleed with a syringe with no issues. My question and what im not sure about is how are trials brakes supposed to feel? I know the clutch is totally different but what about the front brake? Seem like there is a lot more movement before it locks which seems to be about 1.25" before the grip.. Brakes are good but the lever has a lot more movement than a enduro bike.
  8. This looks like it broke off the frame and was holding the mid pipe. Id like a pic if anyone has one available to share so i can try and get it repaired correctly. Thanks
  9. Hi i need some help with the way this fits? which one would be used on a 2002 280 pro? What are these holes slits for? What the correct orientation for fitment?
  10. Maybe seems it would take a month to drain from that smalk hole
  11. So had these re finished and lost the screw and oring. Does anyone know the sizes or a part number. Also what exactly is the purpose of this screw?
  12. Can someone tell me if all gas gas shock years are interchangeable? I want to order this but uncertain of fitment? https://www.ebay.com/itm/GAS-GAS-TXT-Pro-125-250-280-300-Strut-Rear-Shock-Amortisseur-Federbein-Hinten/303226909769
  13. So my shock i assume original is leaking oil and the rod looks worn etc. I hate to keep throwing money in but im committed. Anyways i see a new sachs shock available on ebay which is going to be around 150.00 usd shipped. Is anyone familiar with it BT300003013 SACHS shock or have a alternative suggestion
  14. Here you go not sure if original
  15. ok i just thought the last 4 numbers were the sequential chasis number so #2861 which doesn't seem like 2001 but makes sense the reason for this post is some parts don't fit exactly correct
  16. Confusing because this is a pro?
  17. VIN VTRGG280210022861 Thanks!!
  18. Hi my 2003 280 had a 90° nipple coming out the left side crankcase which is broke off. I see i can get a replacement but wondering what the best way to remove the old and install the new?
  19. Hi thanks for the help definitely not the kickstart washer which is very thin. This is very thick and seems someone might have been trying to fix something the wrong way i just dont know what they were trying to fix
  20. I need help please this clutch was frozen and when i dissatisfied it i lost the order of the clutch bearing and my setup seems like it has a extra washer that's not in the parts manual. The manual has a ridged washer that rides on the fingers then the bearing. Mine has a extra shown in the attached picture.
  21. Hi i believe this bike is a 2004 txt 280. I have no spark and tested between the light blue and dark blue with a reading of 326ohm. The stator has a G2 marking if that makes a difference. Also the casing has a decent amount of corrosion similar to a boat anode. any input or suggestions what values should be and if this is even the correct stator for this bike? Thanks in advance
 
×
  • Create New...