| |
-
My serial number: interesting remark
-
Top end open: original 72mm diameter.
It looks very clean inside, no scratch, very little carbon deposit: seems to have low hours 😏...
This bike has no head gasket ?
-
Cooling blade: I will keep as it is (any advices ?).🙂
-
We are ready for the engine inspection:
-
Cleaning from my workshop for the next phase 😗...
-
To come back to previous question, this seems to be the original design:
-
To come back to previous question, this seems to be the original design:
-
I found this idea, I will try ...
Just to be legal, I am always using the front brake first 😏..
-
Otherwise I got my new carrier, I did some improvements (lights / Turnbuckles replaced by 2" straps).
It's a very good solid product , but expensive 😒
-
I received the petcock, the gas cap is redone (waiting the new "O" rings)...
-
Exhaust / muffler: not the central part.
This bike seems to be done with a "standard" from the web.
I don't want to put 250USD for this silencer
I love this example, any idea ...🤨
-
Thank you, the fuel tap was probably out of service and repair with US thread...
I already ordered the one from Ebay.
Painting is on way, stickers and clear coating to come ..
-
New ignition arrived today 😃...
Next will be the piston, if needed 😆.
Then I will have all to renew my engine: ball bearings, seals, new connecting rod (by experience, I always change bearings for old bike to prevent a reopening ).
I never keep engine open, you never know what could happen (loose elements, corrosion)...
At first to finish my gas tank, but the temperature drops to winter season 🤥: difficult to paint in such condition.
-
Petcock issue: I discovered i have an English Petcock , I found the same in EBAY:
https://www.ebay.com/itm/390669025482
Someone had such experiences ?
-
Primer is done, I have seen some impacts to be done before the final color 😁...
-
A nice repainted gas tank with such cap 😏...
-
Gas cap: I will need a new clean gas cap, they seems so expensive 😪.
Do you have a store to go ?
Thanks
-
My shocks: https://www.feked.com/pro-trials-shock-absorbers-chromed-steel-alloy-mix-330mm-to-400mm-40-or-50lb-springs.html
Ignition I will use:
https://www.electrexworld.co.uk/cgi-bin/sh000001.pl?WD=bultaco&PN=STK-153L.html#SID=826
-
News: I bought a OKO carburetor (they are affordable).
I a still working in my gas tank, inside liner will be done this week (ready for the last phase).
I have the paint for outside, the tank is 90% ready.
I have a question: do you have a reserve position in fuel valve ?
Fly wheel is removed, no real corrosion. Electronic ignition is schedule with 12 DC for the light and accessories.
-
I just get the service manual from Ebay ...😉
-
-
My Alpina will be equiped with a 12 volts system and electronic ignition...
-
No one used another system ?
-
I am thinking for the final color like this Triumph 🤫...
-
I just get the sealing kit for my gas tank:
My tank had a long life before:
|
|
