fantic 300 pro

Greeves, I was hoping the electronic ignition would improve something but never mind, I really do appreciate you taking the time to help me....Thanks again.

Swooshdave thanks for your help, three people have now mentioned to move the condensor!

Cheers for your help TooFastTim, I may try an electronic ignition.

Mr Greeves, Thanks for taking the time to help me out. I have a new condensor, points and coil coming, how does an electronic igniton help the sherpa? and who makes one? Thanks again!

Bo drinker. Cheers for the advice mate! I will swap out that seal

I have just bought a very nice all orignal 350 Sherpa. The bike has not been used in the last 15 years except a few runs up and down the drive. I took it out a couple of weeks ago and it quit on me at the top of a hill after about 20 mins of riding. It would not restart until it cooled down after 15-20 mins, the air temp was about 76 F. Once I got it going I had no probs for another 2 or so hours. I then took the bike out the following week in 90 degree heat, after 15 mins same thing bike cut out on me and would not start for 5 mins. The problem now is that the bike will start but after a min it will cut out on me and continue doing so. Can anybody help please, is it the condensor or HT coil under the tank, should I install new points? Many thanks for any help given.

I have the chance to buy a 250 or 350 Gripper and wanted to know what bike is better? I also wondered if parts are available and where can I obtain them? Many thanks for any advice.

Not sure if you can get one for my fantic 300, but has anybody tried a PVL ignition?

I am wanting to buy the best working and looking pair of shocks out there, can anybody help with suggestions please? Many thanks

Gentlemen, what weight oil should I use in my forks and how much? many thanks for your help.

Will a 240 chain tensioner fit a 300 model? Thanks

Can anybody help me find a set of seals for the stock Marzocchi shocks on my 300 Pro? They are the ones with the fins on the bottom. I am also looking for a complete chain tensioner for the bike. Any help would be appreciated. Cheers...