high changing a tube yesterday and i felt the disk rotor on the front wheel felt loose,checked my dads bike it was the same are they meant to be like it?
i was having a play with the mapping switch on my 09 125 it doesnt seem to do much even at high revs.is this normal or is there very small difference between the two settings?
normally we only tow with one are two bikes on our 3 bike trailer but next week we are taking a mate to a trial,and the 3 bikes will not fit on the trailer together without the bars interferring with each other,what can i do to fix this problem?
I have no idea if the Gas Gas has a rectifier for it's lighting circuit. 6 x 2v rated LED's in series will need no resistor in theory. But if the Supply is AC then a diode in series would be needed.
o right sorry when you say a diode in series do you mean put a diode after the last led so when the curent alternates you only get current flowing for half the time,if you get what i mean
sorry to keep asking you about this stuff,thanks sam
i think that it is AC because of this diagram,http://www.trialspartsusa.com/diagrams/KokusanDigital2005Pro.jpg.(i would think that this 05-07 diagram is simmilar to the 09 wiring)
so would i have to make a rectifier with 4 diodes?
hi,i have a gg 09 125 i have just bought a number board for it and have had to remove the front light,i am doing gcse electronics was wondering if i could make a row of leds to go either over or under the number board.i understand the suply to the front light is 12v so how many leds would i need to :not explode the leds, not damage the bike but make the leds turn on if i conected them in series.
hi,i have a 2009 125 when the bike idles in neutral there is a knocking noise from the engine but when i pull the clutch in it stops.does yours do this?any ideas?
on the make front you will always get different answers mainly being :gasgas beta or sherco.a good engine size for a novice is probally a 200 but if you have been doing green laning then a 250 will probally be fine.
i have got a 2009 125 gasgas,will mine have this mapping switch?on my handlebars there are two switches one controls the lights and the other one appears to do nothing could this be the mapping switch?
I have got two green plastic 5 litre petrol cans.they both leak fuel everywhere and i need a good quality one who does one/where can i get one/any other solutions?
Gas Gas 125 09
in Gas Gas
Posted
yep its normal my 125 09 does it and so does my dad 250 nothing to worry about