September 1, 200620 yr think i will be keeping me 06 as it looks better especialy now ive powdercoated the clamps black and added black renthals+pad + no one has a billet flywheel cover the red bits look crap like the billet clamps and fat bars tho. atomant where is buku graphics and how long and how much to make a set of graphics wot are yours gona look like i want the same as standard but black where its blue Edited September 1, 200620 yr by stump magnet
September 1, 200620 yr atomant where is buku graphics and how long and how much to make a set of graphics wot are yours gona look like i want the same as standard but black where its blue I will tell ya if you make me one of those for my Sherco If not , did you produce an engineering drawing for it so I could get one made! Seriously, I am going completely yellow/black/silver/chrome combination for the colour scheme like the picture I put in at the top. Also, The tank and all plastics will be sprayed metallic black and laquered then ad the BUKU graphics. A set of custom graphics from BUKU in the states are around $120-140 so will make most of you cough contact is bukugraphics AT gmail.com and will take a while to do as the guy is pretty busy at the moment. You wont see them till around the end of october but he does have some which he has already done from like a standard range but they have references to the US market on them.
September 1, 200620 yr would get the sack if i made another one!! just copied the dimensions of the plastic one fit perfect. cheers on the info for the graphics will bear it in mind was the price including postage?
September 1, 200620 yr would get the sack if i made another one!! just copied the dimensions of the plastic one fit perfect.cheers on the info for the graphics will bear it in mind was the price including postage? No, shipping on top
September 2, 200620 yr You bunch of danglers, you ar too cheap to buy my laser engraved CFM swingies at 25 quids!
September 2, 200620 yr Observations, 1- They must have kept the bloody half link in the chain, cause the adjuster starts off on the half point! If you are gonna do that, make some proper cams to go with it! PLEASE! 2- The fat bars appear to be of lower rise, like the Renthals, not good if you prefer the taller bars? Who makes them? NIL as I can find! Add risers, maybe? 3- The swingarm appears to be rough finished on the sides, good or bad? I guess you can polish it with 80 grit paper if it gets damaged! Note bevel on right side! 4- Back to the shorter pipe, eh? 5- Wonder if the shocker works? this time around? For the most, good stuff!
September 2, 200620 yr Author I wonder if I was supposed to see that page, as the link I used to access it on shercos website's front page, was quickly removed.... Maybe they were testing the link and I went on the website at the right time to see the banner ?
September 3, 200620 yr Maybe that is why I could not find it! Good SPYING Peter, Now Andy can relax! He was not overlooked!
September 3, 200620 yr OOOOps, nevermind! Info is up on the RYP site too! Andy is still a common turd!
September 4, 200620 yr Observations,1- They must have kept the bloody half link in the chain, cause the adjuster starts off on the half point! If you are gonna do that, make some proper cams to go with it! PLEASE! 2- The fat bars appear to be of lower rise, like the Renthals, not good if you prefer the taller bars? Who makes them? NIL as I can find! Add risers, maybe? 3- The swingarm appears to be rough finished on the sides, good or bad? I guess you can polish it with 80 grit paper if it gets damaged! Note bevel on right side! 4- Back to the shorter pipe, eh? 5- Wonder if the shocker works? this time around? For the most, good stuff! I might be wrong but I'm guessing the new swingarm will be shorter like the cabestany model so no more bloody half link as you call it. Remember the footpegs are lower. The sorter pipe works well with the new engine in the cabestany model so I'm guessing the new model will also have similar internals. The shocker is the same as the cabestany one by the looks of it and that works for me. Chris
September 4, 200620 yr Observations,1- They must have kept the bloody half link in the chain, cause the adjuster starts off on the half point! If you are gonna do that, make some proper cams to go with it! PLEASE! 2- The fat bars appear to be of lower rise, like the Renthals, not good if you prefer the taller bars? Who makes them? NIL as I can find! Add risers, maybe? 3- The swingarm appears to be rough finished on the sides, good or bad? I guess you can polish it with 80 grit paper if it gets damaged! Note bevel on right side! 4- Back to the shorter pipe, eh? 5- Wonder if the shocker works? this time around? For the most, good stuff! Fat bars are pro taper I think. Swining arm looks sand cast finish in real life. looks like the caby shock, yes
September 7, 200620 yr I did forget to mention the graphic on the headlamp(first thing to go) reminds me ov one of a Spanish interpretation power ranger logo(do you have that there for the kids?) Chunk it!
September 9, 200620 yr Uhhhhh, I'm a definate maybe! Just sold the "05, Need some more of them "quid" thingies you guys have! Do you have any extras? Still have the 1.25 to ride, but I have a hard time getting it to pull my lazy butt in a tough trial! Maybe someone is trying to tel me something!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.